E-Learning/Modules

Showing 1–9 of 48 results

E-Learning/Modules
Basic Servo Motor Drives

Servo Motor Drives (EB06) guides students through six additional skills with an industrialgrade servo motor and drive mounted on a Flexponent® panel. Using precision servo motor systems found in CNC machines, robotic and hydraulic systems, students learn closed-loop servo motor control and system feedback principles while acquiring skills including installing and troubleshooting servo motor drives.

Included

Order #16-EB06:

LearnMate® E-learning Content: Servo Motor Drives (EB06)

Teachers’ Guide

(1) Flexponent® panel:
Panel E091: Servo Motor and Drive

*Requirement (sold separately)

JobMaster® Learning Station Order #10-LS00-0200

Power Control Panel (120V): Order #10-PC04-0000

* International step-down transformer package (Order #10-PC09-0000) required for international applications.

Prerequisite courses
Stepper Motor Drives (EB05) Order #16-EB05

Course Outline

Skills Acquired

Skill 1: Demonstrating Closed-Loop Servo Motor Control Principles
Skill 2: Demonstrating Closed-Loop Servo Motor Principles
Skill 3: Demonstrating Servo System Feedback Device Principles
Skill 4: Demonstrating Analog and Digital Servo Motor Drive Principles
Skill 5: Installing, Connecting and Monitoring a Basic Servo Motor Drive
Skill 6: Testing and Troubleshooting a Basic Servo Motor Drive

Hardware Specifications

Panel E091: Servo Motor and Drive
Panel type: Single
1 Servo motor
1 Servo drive
1 NO pushbutton switch
1 Potentiometer
1 Dial
1 IC test clip, 16-position

(0 reviews)
E-Learning/Modules
Blueprint Reading
Technicians use blueprints to install, maintain, troubleshoot, and service plant machinery and equipment. BA02: Blueprint Reading features skills-based curriculum delivered through LearnMate, Intelitek’s innovative e-learning platform. Through virtual activities, students learn all aspects of reading and interpreting blueprints in industrial environments.

Course Outline
- Identifying Lines and their Functions
  
  Single, Multiple and Auxiliary View
  
  Reading and Locating Blueprint Dimensions
  
  Determining Tolerances
  
  Identifying Thread Dimensions
  
  Identifying Tapers and Machine Surfaces
  
  Cutting Plane and Sections
  
  Geometric Dimensioning, Wear Limits and Assembly Drawings
  
  Identifying Welding Symbols
  
  Reading Plot Plans
  
  Reading Footing, Foundation and Floor Plans
  
  Reading Reinforced Concrete and Structural Steel Prints
(0 reviews)
E-Learning/Modules
Computer Aided Drafting with spectraCAD Engraving
Students are introduced to the basic elements of computer-aided drafting, such as arcs, lines, rectangles, text and circles. Students use polar, relative and absolute coordinates to construct various designs and broaden their learning experience.

Once students have created their CAD drawings, spectraCAD Engraver’s unique engraving feature enables them to easily and quickly generate NC files.

The package includes an engraving tool set and name badge milling stock so that students can produce their NC programs on a CNC milling machine if one exists in the lab.

Included
LM Content
spectraCAD Engraver. Software for converting CAD drawings to NC part program files.

Course Outline

Topics
- Getting Started
- Using spectraCAD
- Managing Files
- Creating the LMC Project
- Drawing the M
- Drawing the C
- Speaker Design Project
- Creating the Speaker Cone
- Completing the Speaker Project
- spectraCAD Engraver
- Generating an NC File
- NC Files and Coding
- Pocketing
- Pocket Toolpaths and spectraCAM
(0 reviews)
E-Learning/Modules
Computer Aided Manufacturing with spectraCAM Milling
Computer-Aided Manufacturing (CAM) Milling introduces students to the fundamentals of CAM programs and their use in industry.

Students use the spectraCAM software, which converts CAD drawings into numerical control (NC) files that can be used to produce parts on a CNC milling center. The spectraCAM software features an integrated CAD drawing package that allows a seamless and easy working environment and includes a graphic tool path simulation package for immediate part proofing.

Activities focus on toolpath generation, contouring, engraving, pocketing, machining operations for ruled and swept surfaces, and code generation.

Included
LM Content:
spectraCAM Milling. Software for converting CAD drawings to NC part program files.

Course Outline

Topics
- Getting Started
- Using SpectraCAM
- Starting the LMC Project
- Generating Tool Paths – LMC Project
- Contouring and NC File Generation
- Speaker Design Project
- First Pocket Operation
- Second Pocket Operation
- Engraving Text and Generating Code
- Advanced Operations Setup
- Advanced Operations
- Ruled Surfaces
- Swept Surfaces
- Final Steps
(0 reviews)
E-Learning/Modules
DC Motor Control

DC Motor Control (EA16) delivers hands-on skills in installing, operating and troubleshooting DC drives used in electric motor circuits. An add-on to Electromagnetic Motor Starters (EA07), EA16 covers eight additional skills including operating SCR and PWM speed controllers, DC drives and braking controls. The skills-based curriculum presents hands on activities using industrial-grade components mounted on the seven included Flexponent® panels.

Included

Order #16-EA16:
LearnMate® E-learning Content: DC Motor Control (EA16)
Teachers’ Guide
(7) Flexponent® panels:
Panel E007: SCR Speed Controller
Panel E017: Digital Relay
Panel E025: F-O-R Switch and Potentiometer
Panel E034: DC Motor
Panel E038: PWM Motor Control
Panel E048: Inertial Load
Panel E071: Regenerative Four Quadrant DC Drive

Requirement (sold separately)

JobMaster® Learning Station Order #10-LS00-0200
Power Control Panel: (120V)* Order #10-PC04-0000

* International step-down transformer package (Order #10-PC09-0000) required for international applications.
Digital multimeter (Fluke Model 115 or equivalent)

Prerequisite courses:
Electric Motors (EA07) Order #16-EA07

Course Outline

Skills Acquired
Skill 1: Demonstrating DC Drive Principles
Skill 2: Connecting an d Operating a SCR Speed Controller
Skill 3: Connecting and Operating a PWM Speed Controller
Skill 4: Connecting, Setting-up, and Operating a DC Drive
Skill 5: Connecting and Operating Braking Controls
Skill 6: Testing a DC Drive
Skill 7: Troubleshooting a DC Drive
Skill 8: Performing Preventative Maintenance

(0 reviews)
E-Learning/Modules
DC Power Supplies

DC Power Supplies (EB02A) delivers hands-on skills in operating industrial-grade bridge rectifiers, transformers and test equipment. The skills-based curriculum builds on the concepts learned in the prerequisite test instruments courses: Oscilloscope (EB01A) and Digital Multimeter (EB01B). DC Power Supplies (EB02A) presents eleven additional skills using bridge rectifiers, diode rectifiers and low-voltage transformers mounted on three included Flexponent® panels.

Included

Order #16-EB02A:

LearnMate® E-learning Content: DC Power Supplies (EB02A)

Teachers’ Guide

(3) Flexponent® panels:
Panel E039: Single-Phase Bridge Rectifier
Panel E061: Low-voltage Transformer
Panel E062: Diode Rectifiers

*Requirement (sold separately)

JobMaster® Learning Station Order #10-LS00-0200

Power Control Panel (120V): Order #10-PC04-0000

* International step-down transformer package (Order #10-PC09-0000) required for international applications.

Prerequisite courses
Digital Multimeter (EB01B) Order #16-EB01B

Course Outline

Skills Acquired

Skill 1 Power Supply Block Diagram
Skill 2 Schematic Symbols
Skill 3 Testing a Transformer
Skill 4 Locating Diodes and Symbols
Skill 5 Testing a Diode
Skill 6 Drawing a Half-Wave Rectifier
Skill 7 Connecting and Operating a Half-Wave DC Power Supply
Skill 8 Confirming Full-Wave DC Power Supply Operation
Skill 9 Connecting and Operating a Full-Wave DC Power Supply
Skill 10 Confirming Single-Phase Bridge Rectifier Operation
Skill 11 Connecting and Operating Single-Phase Bridge Rectifier

Hardware Specifications

Panel E039: Single-Phase Bridge Rectifier
Panel type: Single
1 Bridge rectifier, 25A, 200V
1 Heatsink, TO-3, 76.2mm
2 Fault switch, 4A, 250V, push-on/push-off momentary
Panel E061: Low-voltage Transformer
Panel type: Single
1 Transformer, bobbins, 115V to 24V, 96A
1 Midget fuse block, 30A
1 Fuse, midget, 10A, fast acting
2 Fault switch, 4A, 250V, push-on/push-off momentary
Panel E062: Diode Rectifiers
Panel type: Single
2 Recovery rectifier, 16A, 1.23V
1 Heatsink, TO-3, 76.2mm
2 Fault switch, 4A, 250V, push-on/push-off momentary

(0 reviews)
E-Learning/Modules
Digital Multimeter
Using an industrial grade digital multimeter as well as components on the two included Flexponent® panels, students gain essential skills in the function and operation of a digital multimeter. Digital Multimeter (EB01B) presents hands-on activities in a skills-based format covering safety, measuring voltage and resistance, testing grounds and more.

Included

Order #16-EB01B:

LearnMate® E-learning Content: Digital Multimeter (EB01B)

Teachers’ Guide

Digital Multimeter (Fluke Model 115 or equivalent)

(2) Flexponent® panels:
Panel E052: Resistors
Panel E055: Filters/Capacitors

*Requirement (sold separately)

JobMaster® Learning Station Order #10-LS00-0200

Power Control Panel (120V): Order #10-PC04-0000

* International step-down transformer package (Order #10-PC09-0000) required for international applications.

Prerequisite courses
Oscilloscope (EB01A) Order #16-EB01A

Course Outline

Skills Acquired

Skill 1 Digital Multimeter Safety
Skill 2 DMM Controls and Features
Skill 3 Locating and Reading DMM Icons and Symbols
Skill 4 Reading the Liquid Crystal Display
Skill 5 Setting Up the DMM for Reading AC Voltage
Skill 6 Measuring AC Voltage
Skill 7 Calculating & Converting AC Voltage
Skill 8 Measuring DC Voltage
Skill 9 Measuring Resistance
Skill 10 Discharging a Capacitor
Skill 11 Measuring Capacitance
Skill 12 Testing Capacitors
Skill 13 Measuring Current
Skill 14 Measuring DC Millivolts
Skill 15 Performing Continuity Tests
Skill 16 Testing Grounds and Bonds
Skill 17 Measuring Frequency

Hardware Specifications

Digital Multimeter
- True-rms
- CAT III 600 V safety rated
- AC/DC volts, millivolts, amps
- Continuity
- Resistance
- Diode Test
- Capacitance
- Hz (V or A input)
Panel E052: Resistors
Panel type: Single
- 2 Composition, 470Kohm, 10%, 2W, ceramic
- 1 Ceramic power resistor 180ohm, 5%, 5W
- 1 Ceramic power resistor 330ohm, 5%, 5W
- 1 Ceramic power resistor 470ohm, 5%, 5W
- 1 Ceramic power resistor 680ohm, 5%, 10W
- 1 Ceramic power resistor 900ohm, 5%, 8W
- 1 Ceramic power resistor 1.2Kohm, 5%, 5W
- 1 Ceramic power resistor 2.7Kohm, 5%, 10W
- 1 Ceramic power resistor 3.3Kohm, 5%, 5W
- 1 Ceramic power resistor 6Kohm, 5%, 5W
- 1 Ceramic power resistor 10Kohm, 5%, 5W
- 1 47ohm resistor
Panel E055: Filters/Capacitors
Panel type: Single
- 1 Capacitor, 2.2Uf, 50V, axial, aluminum
- 1 Capacitor, 10uf, 50V, axial, aluminum
- 1 Capacitor, 22uf, 50V, axial, aluminum
- 1 Capacitor, 100uf, 50V, axial, aluminum
- 1 Capacitor, 220uf, 50V, axial, aluminum
- 1 Capacitor, 470uf, 50V, axial, aluminum
- 2 Capacitor, 1000uf, 50V, axial, aluminum
- 1 Capacitor, 150uf, 10V, axial, aluminum
- 1 Inductor, high current, 27uH, 10%, 4.8A, Axial
(0 reviews)
E-Learning/Modules
Electric Circuits

EA01A: Electric Circuits features skills-based curriculum and hands-on activities with industrial-grade components. Students build a solid foundation in electrical circuits.

EA01A: Electric Circuits delivers the skills needed for success in industrial maintenance careers, including:

Lockout/tagout & safety procedures
Connecting an electric circuit
Measuring voltages and currents in an electric circuit
Testing power sources like batteries, thermocouples and PV cells

Included

Flexponent panels:
E040: Switch, Lamp and Buzzer Panel
E045: Sources of Electricity Panel
E047: Heat/Light Source Panel
E151: Series/Paralell Lamp Panel
E152: Transformer/Adjustable Power Panel
Digital Multimeter (Fluke Model 115 or equivalent)

Requirements

(sold separately)

JobMaster Learning Station
Power Control Panel: PC04 (120V)
Each JobMaster module includes the listed hardware and panels to add to your JobMaster Training station, as well as skills-based curriculum.

All modules require a JobMaster Training Station, sold separately.
Some modules also require hardware and/or panels purchased as part of prerequisite skill blocks in the same series, as noted on each product data sheet.

Skills Acquired

Skill 1: Lockout/Tagout
Skill 2: Connecting a Basic Circuit
Skill 3: Identifying Switches
Skill 4: Connecting a Momentary Switch
Skill 5: Connecting a Toggle Switch
Skill 6: Identifying Sources of Electricity
Skill 7: Measuring DC Voltage
Skill 8: Constructing a Series Circuit
Skill 9: Constructing a Parallel Circuit
Skill 10: Applying DC Voltage Principles
Skill 11: Testing an Electrolytic Cell
Skill 12: Testing a Battery
Skill 13: Testing a Thermocouple
Skill 14: Testing a Solar Cell

(0 reviews)
E-Learning/Modules
Electric Motor Drives

Variable Frequency Drives (EA12) delivers comprehensive coverage of installing, operating and troubleshooting variable frequency drives (VFDs) in motor control circuits. Variable Frequency Drives (EA12) is an add-on to Electric Motors (EA04), covering six additional skills. The skills-based curriculum presents hands-on activities using an industrial-grade Mitsubishi VFD.

Included

Order #16-EA12:
LearnMate® E-learning Content: Variable Frequency Drives (EA12)
Teachers’ Guide
(2) Flexponent® panels:
Panel E067: Variable Frequency Drive (Mitsubishi)
Panel E002: START-STOP Control

REQUIREMENTS (sold separately)

JobMaster® Learning Station Order #10-LS00-0200

Power Control Panel (220V) 3-Phase Order #10-PC06-0000

* International step-down transformer package (Order #10-PC09-0000) required for international applications.

Digital multimeter (Fluke Model 115 or equivalent)

Prerequisite courses:
Electric Motors (EA04) Order #16-EA04

COURSE OUTLINE

Skills Acquired
Skill 1: Applying VFD Principles
Skill 2: Connecting and Operating a Variable Frequency Drive
Skill 3: Adjusting VFD Operating Parameters
Skill 4: VFD Protection Parameters and Inputs/Outputs
Skill 5: Troubleshooting the VFD
Skill 6: Understanding Additional VFD Features

(0 reviews)