Additional information
| Brand | Intelitek |
|---|
Liquid & Gas Absorption Process Pilot Plant (Model PP-101)
The Liquid & Gas Absorption Process Pilot Plant (Model PP-101) is connected and fully monitored from an industrial Programmable Logic Controller (PLC), with a SCADA system mounted on a local control panel. The PP-101 is designed with an option to be connected to any industrial standard DCS control system via the “Selector” switch at the local panel.
It consists of the following minimum equipment and instrumentation:
-
- Pre-fabricated scaled-down stainless steel platform, with pre-installed stainless steel piping, stainless steel water separation unit, air compressor, instruments and instruments support accessories, valves, etc.
- Industrial standard analytical sensors and transmitters. Transmitters come with tubing and support accessories in a modular basis for easy hook-up to the plant.
- Local control panel installed with electrical starter for motor, power supply (240VAC & 24VDC), switches, pushbuttons, indicators, SCADA system and other connections accessories.
- Raw materials for experiments.
- Industrial standard mass flow meter with pre-installed piping and tubing in a modular basis for easy hook-up to the plant. Gas analyzer with pre-installed piping and tubing in a modular basis for easy hook-up to the plant.
- Moisture production unit to inject moisture into the gas pip
- Two (2) moisture separator units to remove moisture from gas.
- CO2 removal unit to remove CO2 content in gas.
- Other calibration tools for sensor and transmitter calibration.
100% Original and qualityRelated products
-
Process ControlLevel Control Trainer
The PCT-M2 Level control trainer system enables the study of the principles in Level control and monitoring in a system. The system is self-contained and only requires connection to a PC through USB. The control module is contained on the unit and has a mimic of the systems and LED indication. The PCT-M2 can be controlled through the graphical based software supplied with the unit providing PID control.
The system comprises a pump connected through PVC pipes from a reservoir tank to a process tank and a valve to control the flow out of the process tank into the reservoir tank. The level in the process tank is measured using a pressure transducer and a needle type drain valve is fitted to provide a disturbance to the system. The clear tanks and pipes allow the student to see clearly the process they are controlling.
Key Features
- Control and measurement of Level
- PID control PC SCADA type software with control and data monitoring
- Complete self-contained unit
- Connection to PC through USB
- Water used for the process
- Pressure sensor used to measure level
- Manual disturbance using a needle valve with incremental markings
- Visual indication of level
- Clear tank and pipes
(0 reviews) -
Air Flow and ThermodynamicsTraining Boiler: 100kg/hr
This is a set of steam boiler and standard accessories for a study of boiler performance.
The basic unit consists of a small industrial type boiler with a burner, a feed water system, a fuel system, and instruments for monitoring boiler operation as well as instruments for control and safety. The complete unit is
arranged as a package on a pallet for easy site installation. Optional equipment are available for additional experiments.Instruction manual is also included.
TYPICAL EXPERIMENTS- Pressure, temperature and flow measurements.
- Heat of combustion, heat given to steam and boiler efficiency.
TECHNICAL DATAThe boiler set consists of:
Boiler unit: – Type Vertical, water tube – Rated output Approx. 105 kW (90,300 kcal/h) – Equivalent evaporation Approx. 100 kg/h steam – Maximum working pressure 10 kg/cm2 (0.98 MPa) – Measuring instruments Pressure gauge for steam outlet , Temperature sensor and indicator with a selector switch for or feed water, outlet steam and exhaust stack – Safety devices Safety valve , Low level alarm – Boiler accessories Steam pressure regulator , Steam separator , Feed water pump , Stack, 2x 2.4 m stainless steel with elbows Burner: – Type Forced draft, pressure atomized – Control On-Off – Fuel Diesel or kerosene (LPG is available as an option.) Fuel system Fuel tank, fuel meter and oil strainer Feed water system Resin filter, soft water tank and water meter. Power supply 220V, 1 Ph, 50Hz. Other power supply is available on request. (0 reviews)
