Accessories
Showing 1–9 of 13 results
-
AccessoriesDigital Display Unit for Water Level Gauges and Transducers
The digital display unit is for use with individual gauges and transducers. It contains a digital panel meter, which has a 0-10V output and a serial RS 422/485 connection. A separate power supply unit allows the instrument to be used with either 110V AC or 220V AC supplies.
It is supplied with a case and 0 – 5V output.
Display
- 14mm high brightness LED
- Display supply: 24V DC (90-250V AC adaptor supplied)
- Display output – analogue: 0-10V, 0-20mA or 4-20mA
- Display output – serial comms: RS422/485
(0 reviews) -
AccessoriesFS100 Controller
The FS100 is a compact controller with performance and functions optimized for materials handling and assembly. It can be used with robots with a 20-kg payload or less.
Fits in a 19-inch rack and can be installed under conveyors. The controller has the performance required for high speed, discrete operations.The FS100 supports a wide range of communication networks and a single controller supports up to eight axes.
FS-100 Features
- Powerful controller for high-performance applications
- Open software architecture and open communications
- Small footprint saves space
- Energy savings
- Compliant to safety standards
(0 reviews) -
AccessoriesHigh Performance Pressure Sensor – 10m Water Gauge (Flush Diaphragm)
The high performance pressure sensors are ideally suited for measurements in hydraulic models.
This high performance pressure is designed for 10m water gauges. Mounted with a flush diaphragm, this pressure sensor is suitable to measure impact pressures on structures. If you would like to measure water depth and wave pressure under rubble mounds or pressure in pipes and other vessels, high pressure sensors threaded with a protective nose cone are better fit for these purposes.
High pressure sensors with flush diaphragm for 5m and 10m water gauges are also available from this website.
Diaphragm and cables
The all welded diaphragm and body are manufactured from 316 stainless steel.
The sensors are supplied with a 10m length of vented cable, which has an internal vent tube and strainer wire. Alternative cable lengths can be ordered on request.
Digital display unit option
The user can choose to purchase their pressure sensors equipped with a digital display unit, which shows pressure in a range of parameters.
Image
The image on the left hand side shows the 3 types of pressure sensors.
Key features
- Covers depth and impact measurements
- 19mm diameter sensor
- Digital display
- 0-10V output signal
Sensors
- Full scale range: 2, 5, 10, 20, 50, 100, 200m WG
- Max over pressure: 25, 25, 30, 40, 70, 150, 300m WG
- Resonant frequency in air: 20kHZ
- Combined non-linearity and hysteresis: 0.25% full scale all ranges
- Temperature effects: 0.015% FS/°C over 0-50°C
- Cable lengths: 0.015% FS/°C over 0-50°C
(0 reviews) -
Accessories
High Performance Pressure Sensor – 2m Water Gauge (Flush Diaphragm)
The high performance pressure sensors are ideally suited for measurements in hydraulic models.
This high performance pressure is designed for 2m water gauges. Mounted with a flush diaphragm, this pressure sensor is suitable to measure impact pressures on structures. If you would like to measure water depth and wave pressure under rubble mounds or pressure in pipes and other vessels, high pressure sensors threaded with a protective nose cone are better fit for these purposes.
High pressure sensors with flush diaphragm for 5m and 10m water gauges are also available from this website.
Diaphragm and cables
The all welded diaphragm and body are manufactured from 316 stainless steel.The sensors are supplied with a 10m length of vented cable, which has an internal vent tube and strainer wire. Alternative cable lengths can be ordered on request.
Digital display unit option
The user can choose to purchase their pressure sensors equipped with a digital display unit, which shows pressure in a range of parameters.Image
The image on the left hand side shows the 3 types of pressure sensors.Key features
- Covers depth and impact measurements
- 19mm diameter sensor
- Digital display
- 0-10V output signal
Sensors
- Full scale range: 2, 5, 10, 20, 50, 100, 200m WG
- Max over pressure: 25, 25, 30, 40, 70, 150, 300m WG
- Resonant frequency in air: 20kHZ
- Combined non-linearity and hysteresis: 0.25% full scale all ranges
- Temperature effects: 0.015% FS/°C over 0-50°C
- Cable lengths: 0.015% FS/°C over 0-50°C
(0 reviews) -
Accessories
High Performance Pressure Sensor – 2m water gauge (Threaded with Nose Cone)
The high performance pressure sensors are ideally suited for measurements in hydraulic models.
This high performance pressure is designed for 2m water gauges. Threaded with nose cone, this pressure sensor is suitable to measure water depth and wave pressure under rubble mounds or pressure in pipes and other vessels. If you would like to measure impact pressures on structures, high pressure sensors mounted with flush diaphragm are better fit for this purpose.
High pressure sensors threaded with nose cone for 5m and over 10m water gauges are also available from this website.
Diaphragm and cables
The all welded diaphragm and body are manufactured from 316 stainless steel.The sensors are supplied with a 10m length of vented cable, which has an internal vent tube and strainer wire. Alternative cable lengths can be ordered on request.
Digital display unit option
The user can choose to purchase their pressure sensors equipped with a digital display unit, which shows pressure in a range of parameters.Image
The image on the left hand side shows the 3 types of pressure sensors.Key features
- Covers depth and impact measurements
- 19mm diameter sensor
- Digital display
- 0-10V output signal
Sensors
- Full scale range: 2, 5, 10, 20, 50, 100, 200m WG
- Max over pressure: 25, 25, 30, 40, 70, 150, 300m WG
- Resonant frequency in air: 20kHZ
- Combined non-linearity and hysteresis: 0.25% full scale all ranges
- Temperature effects: 0.015% FS/°C over 0-50°C
- Cable lengths: 0.015% FS/°C over 0-50°C
(0 reviews) -
Accessories
High Performance Pressure Sensor – 5m Water Gauge (Flush Diaphragm)
The high performance pressure sensors are ideally suited for measurements in hydraulic models.
This high performance pressure is designed for 2m water gauges. Mounted with a flush diaphragm, this pressure sensor is suitable to measure impact pressures on structures. If you would like to measure water depth and wave pressure under rubble mounds or pressure in pipes and other vessels, high pressure sensors threaded with a protective nose cone are better fit for these purposes.
High pressure sensors with flush diaphragm for 5m and 10m water gauges are also available from this website.
Diaphragm and cables
The all welded diaphragm and body are manufactured from 316 stainless steel.The sensors are supplied with a 10m length of vented cable, which has an internal vent tube and strainer wire. Alternative cable lengths can be ordered on request.
Digital display unit option
The user can choose to purchase their pressure sensors equipped with a digital display unit, which shows pressure in a range of parameters.Image
The image on the left hand side shows the 3 types of pressure sensors.Key features
- Covers depth and impact measurements
- 19mm diameter sensor
- Digital display
- 0-10V output signal
Sensors
- Full scale range: 2, 5, 10, 20, 50, 100, 200m WG
- Max over pressure: 25, 25, 30, 40, 70, 150, 300m WG
- Resonant frequency in air: 20kHZ
- Combined non-linearity and hysteresis: 0.25% full scale all ranges
- Temperature effects: 0.015% FS/°C over 0-50°C
- Cable lengths: 0.015% FS/°C over 0-50°C
(0 reviews) -
Accessories
High Performance Pressure Sensor – 5m water gauge (Threaded with Nose Cone)
The high performance pressure sensors are ideally suited for measurements in hydraulic models.
This high performance pressure is designed for 2m water gauges. Threaded with nose cone, this pressure sensor is suitable to measure water depth and wave pressure under rubble mounds or pressure in pipes and other vessels. If you would like to measure impact pressures on structures, high pressure sensors mounted with flush diaphragm are better fit for this purpose.
High pressure sensors threaded with nose cone for 5m and over 10m water gauges are also available from this website.
Diaphragm and cables
The all welded diaphragm and body are manufactured from 316 stainless steel.The sensors are supplied with a 10m length of vented cable, which has an internal vent tube and strainer wire. Alternative cable lengths can be ordered on request.
Digital display unit option
The user can choose to purchase their pressure sensors equipped with a digital display unit, which shows pressure in a range of parameters.Image
The image on the left hand side shows the 3 types of pressure sensors.Key features
- Covers depth and impact measurements
- 19mm diameter sensor
- Digital display
- 0-10V output signal
Sensors
- Full scale range: 2, 5, 10, 20, 50, 100, 200m WG
- Max over pressure: 25, 25, 30, 40, 70, 150, 300m WG
- Resonant frequency in air: 20kHZ
- Combined non-linearity and hysteresis: 0.25% full scale all ranges
- Temperature effects: 0.015% FS/°C over 0-50°C
- Cable lengths: 0.015% FS/°C over 0-50°C
(0 reviews) -
Accessories
High Performance Pressure Sensor >10m water gauge (Threaded with Nose Cone)
The high performance pressure sensors are ideally suited for measurements in hydraulic models.
This high performance pressure is designed for over 10m water gauges. Threaded with nose cone, this pressure sensor is suitable to measure water depth and wave pressure under rubble mounds or pressure in pipes and other vessels. If you would like to measure impact pressures on structures, high pressure sensors mounted with flush diaphragm are better fit for this purpose.
High pressure sensors threaded with nose cone for 2m and 5m water gauges are also available from this website.
Diaphragm and cables
The all welded diaphragm and body are manufactured from 316 stainless steel.
The sensors are supplied with a 10m length of vented cable, which has an internal vent tube and strainer wire.
Digital display unit option
The user can choose to purchase their pressure sensors equipped with a digital display unit, which shows pressure in a range of parameters.
Image
The image on the left hand side shows the 3 types of pressure sensors.
Key features
- Covers depth and impact measurements
- 19mm diameter sensor
- Digital display
- 0-10V output signal
Sensors
- Full scale range: 2, 5, 10, 20, 50, 100, 200m WG
- Max over pressure: 25, 25, 30, 40, 70, 150, 300m WG
- Resonant frequency in air: 20kHZ
- Combined non-linearity and hysteresis: 0.25% full scale all ranges
- Temperature effects: 0.015% FS/°C over 0-50°C
- Cable lengths: 0.015% FS/°C over 0-50°C
(0 reviews) -
AccessoriesTransducer Output and Power Supply Unit
This self-contained interface box feeds up to eight separate voltage inputs in the range of -10V to +10V to a host PC for data acquisition via a USB link.
It has 8 input sockets each able to supply 24V DC at approximately 100mA to any compatible sensor or transducer. Power is from an external desktop-style PSU and two panel-mounted LEDs provide power-on and USB activity indication. Power lead, USB lead and USB driver software are also supplied.
This unit can accommodate up to 8 compatible transducers.
(0 reviews)
