Wave Gauge
Showing all 8 results
-
Marine, Naval, Hydrodinamic and OceanographTwin Wire Wave Probe – 1200 mm
Wave probes operate by measuring the current that flows between two stainless steel wires that are immersed in water. This current is converted to an output voltage that is directly proportional to the immersed depth.
Each wave probe comprises two parallel stainless steel rods with a plastic head and foot. The head is fixed to the calibration stem and a mounting block is supplied that allows the calibration stem to be fixed to any vertical surface.
Specification:
- Active length: 1200mm
- Probe type: resistive
- Other lengths available: 300mm, 600mm, 900mm
(0 reviews) -
Marine, Naval, Hydrodinamic and OceanographTwin Wire Wave Probe – 300 mm
Wave probes operate by measuring the current that flows between two stainless steel wires that are immersed in water. This current is converted to an output voltage that is directly proportional to the immersed depth.
Each wave probe comprises two parallel stainless steel rods with a plastic head and foot. The head is fixed to the calibration stem and a mounting block is supplied that allows the calibration stem to be fixed to any vertical surface.
Specification
- Active length: 300 mm
- Probe type: resistive
- Other lengths available: 600 mm, 900 mm, 1200 mm
(0 reviews) -
Marine, Naval, Hydrodinamic and OceanographTwin Wire Wave Probe – 600 mm
Wave probes operate by measuring the current that flows between two stainless steel wires that are immersed in water. This current is converted to an output voltage that is directly proportional to the immersed depth.
Each wave probe comprises two parallel stainless steel rods with a plastic head and foot. The head is fixed to the calibration stem and a mounting block is supplied that allows the calibration stem to be fixed to any vertical surface.
Specification
- Active length: 600 mm
- Probe type: resistive
- Other lengths available: 300 mm, 900 mm, 1200mm
(0 reviews) -
Marine, Naval, Hydrodinamic and OceanographTwin Wire Wave Probe – 900 mm
Wave probe operate by measuring the current that flows between two stainless steel wires that are immersed in water. This current is converted to an output voltage that is directly proportional to the immersed depth.
Each wave probe comprises two parallel stainless steel rods with a plastic head and foot. The head is fixed to the calibration stem and a mounting block is supplied that allows the calibration stem to be fixed to any vertical surface.
Specification
- Active length: 900 mm
- Probe type: resistive
- Other lengths available: 300 mm, 600 mm, 1200 mm
(0 reviews) -
Marine, Naval, Hydrodinamic and OceanographWave Gauge System – 8 Channels
The wave gauge system is a simple and reliable device for measuring rapidly changing water levels in physical models. When combined with our HR DAQ data acquisition and analysis software it provides a first rate method of measuring wave height in a flume or 3D basin.
Our wave gauge system is suitable for use in:
2D flume
For this configuration, the wave probes are supplied with a mounting block allowing the calibration stem, that is fixed to the wave probe head, to be attached to any vertical surface.3D wave basin
For basins, we have a selection of tripods for using 600 to 1200 mm wave probes. For shallow water up to 1 m depth, a smaller stand to fit 300 mm wave probes is available.Product features:
- Extremely linear output
- No hysterisis
- Reliable, proven design
- Easily calibrated
- Longer distances from the data acquisition PC can be achieved by linking two wave probe cases together
- Multiple wave probe cases can be used in the digital network to meet the desired number of wave probe channels
- Data can be logged directly into a computer via the network link and analysed using HR DAQ software.
Our wave gauge system includes:
Wave probesEach wave probe comprises two parallel stainless steel rods, each with a plastic head and foot. The wave probes operate by measuring the current that flows between the two rods immersed in water. This current is converted to an output voltage that is directly proportional to the immersed depth. The standard probe lengths are 300, 600 and 900 mm.
Wave probe case
A wave probe case is supplied to accommodate up to eight monitors. This case contains all the necessary signal conditioning, together with an inbuilt analogue-to-digital output that allows the data to be saved directly to a data acquisition PC.
The case is supplied with its own standard plug and power supply for the modules.
If you need to use more than eight probes at the same time, then multiple cases can be linked together so requiring only one computer for configuration.
HR DAQ software
Our wave gauge system can be connected to a computer to collect data. This data can also be analysed using HR DAQ for analysis +/- 10V dc analogue output available for use with other data acquisition systems.
(0 reviews) -
Marine, Naval, Hydrodinamic and Oceanograph
Wave Probe Case – 8 Channels
This case holds the wave probe monitor module and could also contain the USB digital output facility.
Available in 110-220V AC
(0 reviews) -
Marine, Naval, Hydrodinamic and OceanographWave Probe Monitor Module
The wave probe monitor module is an electronic circuit that uses the process of measuring current to determine the height of the water level. It is located within the wave probe monitor case and connects to the wave probe by a twin core cable
(0 reviews) -
AccessoriesWave Probe Mounting Bracket
This wave probe mounting bracket will fit 600 mm to 1200 mm wave probes.
(0 reviews)
