Power Plant
Showing all 6 results
-
Air Flow and ThermodynamicsCompact Steam Turbine Power Plant 0.5 kW
The unit is designed to simulate modern steam power plant. Main components consist of a feed water system, a small industrial boiler, a steam turbine, a generator and lamp load, a condenser with a condensate tank and a pump, and a cooling tower. Accessories such as fuel tank, fuel flow meter, feed water meter, and a stack are also included. Instruments are provided for measurement of pressures, temperatures, output voltage and currents.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Measurement of feed water and fuel flow rates.
- Boiler efficiency, turbine generator efficiency, and overall power plant efficiency.
- Condenser heat transfer efficiency.
- Cooling tower efficiency.
TECHNICAL DATAThe boiler set consists of:
A . Boiler Unit: – Type Vertical, water tube – Rated heat output Approx. 63 kW (53,900 kcal/h) – Equivalent evaporation Approx. 100 kg/h steam – Maximum working pressure 10 kg/cm2 (0.98 MPa) – Measuring instruments - Pressure gauge for steam outlet
- Temperature sensors for feed water, boiler outlet and exhaust stack. (including ambient temperature)
– Safety devices - Safety valve
- Level gauge and switch at boiler
- Low level alarm
– Boiler accessories - Steam separator
- Stack, 2 x 2.4 m stainless steel with elbows
Burner: – Type Forced draft, pressure atomized – Control On-Off – Fuel Diesel or kerosene (LPG is available as an option.) Fuel system Stainless steel fuel tank, fuel strainer and fuel meter Feed water system: – Resin filter for public water. – Soft water tank. stainless steel – Water meter for steam rate monitoring Power supply 380 V, 3 Ph, 50Hz. Other power supply is available on request. B . Steam Turbine – Type Single stage, twin nozzle impulse turbine – Maximum electrical output Approx. 0.3 kW Measuring instruments: – Speed sensor for turbine – Temperature sensors for steam inlet and outlet – Pressure gauge for steam inlet – Water manometer for turbine outlet C . Generator and Lamp Load Voltage 220V, 1 Ph, 50 Hz. Load lamps 1 set. Measuring instruments – Generator speed digital display – Voltage and current digital display D. Condenser and Cooling Tower TH 101-013 Condenser Description : The unit allows a study of heat transfer in a heat exchanger as well as recover condensate for reuse.
– Type Steam tube – Accessories and instruments - Cooling water pump
- Water meter.
- Condensate tank.
- Stainless steel
- Temperature sensors for condensate, cooling water inlet and outlet
- Strainer
TH 135-014 Cooling Tower Description : This is an educational unit for recovering of condenser cooling water as well as
studying of cooling tower efficiencyE . Software for data display and analysis by computer (separately supplied). (0 reviews) -
Air Flow and ThermodynamicsCompact Steam Turbine Power Plant 1.0 kW
The unit is designed to simulate modern steam power plant. Main components consist of a feed water system, a small industrial boiler, a steam turbine, a generator and lamp load, a condenser with a condensate tank and a pump, and a cooling tower. Accessories such as fuel tank, fuel flow meter, feed water meter, and a stack are also included. Instruments are provided for measurement of pressures, temperatures, output voltage and currents.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Measurement of feed water and fuel flow rates.
- Boiler efficiency, turbine generator efficiency, and overall power plant efficiency.
- Condenser heat transfer efficiency.
- Cooling tower efficiency.
- Rankine cycle efficiency.
TECHNICAL DATAThe boiler set consists of:
A . Boiler Unit: – Type Vertical, water tube – Rated heat output 125 kW (107,000 kcal/h) – Equivalent evaporation Approx. 200 kg/h steam – Maximum working pressure 10 kg/cm2 (0.98 MPa) – Measuring instruments - Pressure gauge for steam outlet
- Temperature sensors for feed water, boiler outlet and exhaust stack (including ambient temperature)
– Safety devices - Safety valve
- Level gauge and switch at boiler
- Low level alarm
– Boiler accessories - Steam separator
- Stack, 2 x 2.4 m stainless steel with elbows
Burner: – Type Forced draft, pressure atomized – Control On-Off – Fuel Diesel or kerosene (LPG is available as an option.) Fuel system Stainless steel fuel tank, fuel strainer and fuel meter Feed water system: – Resin filter for public water. – Soft water tank. Stainless steel – Water meter for steam rate monitoring Power supply 380 V, 3 Ph, 50Hz. Other power supply is available on request. B . Steam Turbine – Type Single stage, twin nozzle impulse turbine – Maximum electrical output Approx. 0.6 kW Measuring instruments: – Speed sensor for turbine – Temperature sensors for steam inlet and outlet – Pressure gauge for steam inlet – Water manometer for turbine outlet C . Generator and Lamp Load Voltage 220V, 1 Ph, 50 Hz. Load lamps 1 set. Measuring instruments – Generator speed digital display – Voltage and current digital display D . Condenser and Cooling Tower TH 102-013 Condenser Description : The unit allows a study of heat transfer in a heat exchanger as well as recover condensate for reuse.
– Type Steam tube – Accessories and instruments - Cooling water pump
- Condensate transfer pump
- Water meter
- Condensate tank
- Stainless steel
- Temperature sensors for condensate, cooling water inlet and outlet
- Strainer
TH 136-014 Cooling Tower Description : This is an educational unit for recovering of condenser cooling water as well as studying of cooling tower efficiency. The unit consists of a cooling tower unit, a storage tank, a circulating pump and temperature gauges.
Technical data – Storage tank – Cooling tower capacity – Circulating pump – Wet bulb temperature sensor E . Software for data display and analysis by computer (separately supplied). (0 reviews) -
Air Flow and ThermodynamicsCompact Steam Turbine Power Plant 1.5 kW
The unit is designed to simulate modern steam power plant. Main components consist of a feed water system, a small industrial boiler, a steam turbine, a generator and lamp load, a condenser with a condensate tank and a pump, and a cooling tower. Accessories such as fuel tank, fuel flow meter, feed water meter, and a stack are also included. Instruments are provided for measurement of pressures, temperatures, output voltage and current.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Measurement of feed water and fuel flow rates.
- Boiler efficiency, turbine generator efficiency, and overall power plant efficiency.
- Condenser heat transfer efficiency.
- Cooling tower efficiency. Rankine cycle efficiency.
TECHNICAL DATAThe boiler set consists of:
A . Boiler Unit: – Type Vertical, water tube – Rated heat output 188 kW (162,000 kcal/h) – Equivalent evaporation Approx. 300 kg/h steam – Maximum working pressure 10 kg/cm2 (0.98 MPa) – Measuring instruments - Pressure gauge for steam outlet
- Temperature sensors for feed water, boiler outlet and exhaust stack (including ambient temperature)
– Safety devices - Safety valve
- Level gauge and switch at boiler
- Low level alarm
– Boiler accessories - Steam separator
- Steam pressure regulator
- Stack, 2 x 2.4 m stainless steel with elbows
Burner: – Type Forced draft, pressure atomized – Control On-Off – Fuel Diesel or kerosene (LPG is available as an option.) Fuel system Stainless steel fuel tank, fuel strainer and fuel meter Feed water system: – Resin filter for public water. – Soft water tank. Stainless steel – Water meter for steam rate monitoring Power supply 380 V, 3 Ph, 50Hz. Other power supply is available on request. B . Steam Turbine – Type Single stage, twin nozzle impulse turbine – Maximum electrical output Approx. 0.9 kW Measuring instruments: – Speed sensor for turbine – Temperature sensors for steam inlet and outlet – Pressure gauge for steam inlet – Water manometer for turbine outlet C . Generator and Lamp Load Voltage 220V, 1 Ph, 50 Hz. Load lamps 1 set. Measuring instruments D . Condenser and Cooling Tower TH 102-013 Condenser Description : The unit allows a study of heat transfer in a heat exchanger as well as recover condensate for reuse.
– Type Steam tube – Accessories and instruments - Cooling water pump
- Condensate transfer pump
- Water meter
- Condensate tank : Stainless steel
- Temperature sensors for cooling water inlet and outlet
- Strainer
TH 137-014 Cooling Tower Description : This is an educational unit for recovering of condenser cooling water as well as studying of cooling tower efficiency.
E . Software for data display and analysis by computer (separately supplied). (0 reviews) -
Air Flow and ThermodynamicsMini Gas Turbine Power Plant
The unit is an educational two-shaft gas turbine power plant with a radial flow compressor and axial flow turbines, gear box, generator, and electrical loads as in the modern gas turbine power plant.
The first stage is a hot gas generator. Inlet air through an orifice flow measuring device is compressed by a single stage radial flow compressor. The turbine is motor started and runs on Jet A fuel. Fuel is injected by a fuel pump and ignited in the combustion chamber providing hot gas for a single stage axial flow turbine which in turn drives the compressor. The hot gas is discharged axially to a larger power turbine on the second shaft and exhausts to atmosphere. A fan is provided for cooling the gear box.
The power turbine output shaft is connected to the gear box. An alternator is connected to the gear box by a direct coupling. the electrical output is converted by an inverter to 220 VDC and the electrical power output is connected to a lamp load.
An Electronic Control Unit (ECU) controls the basic turbine operation. Additional instruments are provided for monitoring and controlling the plant operation and performance.
A touch screen computer with an interface unit and software are provided for speed and load control, data display and analysis, and to assist the ECU.
Safety features include clear acrylic cover, gas generator over speed shutdown, power turbine over speed protection and power turbine entry over temperature shut down. The unit is floor standing with removable supports.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Understanding the thermodynamic process.
- Input power, output power and plant efficiency.
- Mechanical power of gas turbine (optional)
TECHNICAL DATAGas generator engine construction. – Diffuser High strength aluminium – Combustion chamber Stainless steel – Turbine wheel Vacuum cast inconel – Compressor Garrett high grade aluminium alloy Running fuel Jet A or kerosene with 5 percent jet oil Power turbine construction. – Turbine wheel Vacuum cast inconel – Interstage guide vane Stainless steel Gear box. – Type Planetary – Lubrication Jet A Lamp load 2x 200W and 4x 50W with individual lamp switch. Gear box and generator connection Direct coupling Output power - Electrical approx. 400 W
- Mechanical approx. 700 W (require optional dynamometer)
Accessories - Engine cooling fan
- Gear box cooling fan
- Engine exhaust duct
- 2 ear muffs
- Jet oil
Sensors – Temperatures Ambient air, diffuser exit, gas generator turbine entry, power turbine entry and exit. – Pressures Diffuser exit, gas generator turbine entry, power turbine entry and exit. – Speeds Gas generator and gear box output shaft – Fuel flow rate. – Air flow rate Differential pressure at inlet orifice. Software for data display, analysis and control by computer (separately supplied) Power supply 220V 1Ph 50Hz. Other power supply is available on request. (0 reviews) -
Turbine Test SetMini Hydro Power Plant
This is a self contained bench top unit for studying the power generation by a hydraulic turbine. The unit consist of a storage tank and a low head pump to simulate a dam reservoir, a cross flow hydraulic turbine, a generator which is connected to the turbine by a V-belt, a lamp load bank, a dynamometer, and measuring instrument.
TYPICAL EXPERIMENTS- Turbine torque vs speed at various heads and flow rates.
- Mechanical power output vs speed for various heads and flow rates.
- Mechanical efficiency vs speed for a given head and flow rate.
- Electrical power output at various heads and flow rates.
- Overall power plant efficiency at various electrical loads.
TECHNICAL DATATurbine: – Type Cross Flow – Construction - 168 mm diameter stainless steel runner, shaft and nozzle.
- Stainless steel casing with transparent window.
– Ratings - 400 W of mechanical power.
- Maximum speed approx 1500 rpm.
Pump ratings – Motor 2.2 kW – Maximum flow rate 500 lpm. Generator - 0.75 kW, 220 V, 1 Ph, 50 Hz.
- Electrical output upto 300 W.
Electrical load Lamp bank, 7 lamps, 400W. Dynamometer Water cooled stainless steel mechanical brake with anti splashing system. Measuring instruments – Torque Spring balance – Pressure Pressure gauge – Sensors with digital display - Electrical output power.
- Turbine and generator speeds.
- Flow rate.
Power supply 220 V, 1 Ph, 50 Hz. Other power supply is available on request. (0 reviews) -
Air Flow and ThermodynamicsMini Steam Turbine Power Plant
Mini Steam Turbine Power Plant is designed as a miniature modern day power plant for educational purpose.
A pump supplies water from a feed tank to a small gas fired boiler. The saturated steam can be superheated by an electric superheater (optional). The steam is throttled to single stage turbine. Exhaust from the turbine is condensed in a water cooled condenser. Condensate is collected in a graduated beaker and returned to feed water tank by a pump. A small DC generator is connected to the turbine by a belt, and electrical load is applied. A mechanical dynamometer is provided for measurement of turbine mechanical output. The unit requires outside water supply.
Instruments are provided for monitoring and controlling of plant operation and performance as well as for safety. The unit is on a steel frame with adjustable footings.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Thermodynamic process
- Fuel consumption
- Power generation
- Efficiencies for boiler, turbine, condenser heat transfer and overall plant.
- Effect of temperature on turbine efficiency (optional).
- Effect of super-heated steam on efficiency (optional).
- Heat balance and energy utilization. Rankine cycle efficiency.
TECHNICAL DATABoiler – Type Fire tube vertical boiler – Equivalent evaporation Approx. 7 kg/h steam – Maximum working pressure 5 kg/cm2 (0.49 MPa) Boiler accessories Steam separator, manual feed pump, safety valve, level gauge, and low level alarm Fuel Liquefied Petroleum Gas (LPG) Feed water tank Stainless steel with level gauge Steam turbine – Type - Single stage impulse turbine
- Single nozzle
Power output measurements Mechanical brake dynamometer Electrical power system DC generator with resistive load Condenser Shell and tube type Plant output at maximum worki – Without super heater - Mechanical approximately 10 W
- Electrical approximately 4 W
– With super heater (optional) - Mechanical approximately 15 W
- Electrical approximately 6 W
Safety features – Turbine speed limit. – Emergency switch. Accessories Electric condensate transfer pump and boiler cleaning kits Measuring instruments – Pressures gauge 1 ea. – Flow meters 2 ea. – Graduated beaker and stop watch for condensate measurement – Voltage and current digital display. Software for data display and analysis by computer (separately supplied). Power supply 220 V, 1 Ph, 50Hz. Other power supply is available on request. Similar products:
Compact Steam Turbine Power Plant 0.5 kW
(0 reviews)
