Additional information
| Brand | Essom |
|---|
Impact of a Jet
This equipment provides measurement of force developed by a water jet on different stationary targets. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The equipment consists of a removable clear acrylic cylinder. Water is supplied through a tube at the bottom of the cylinder and discharged vertically through a nozzle onto a target plate. Each plate maintains the same working distance from the nozzle. A clear acrylic guard is provided to prevent water jet from splashing on the target. Force on the plate pushes its stem upward. Dead weight is then applied on the stem to counter balance the force exerted by the water jet. This balance is indicated by a pointer on a steel rod next to the weight. The apparatus rests on adjustable footings and a bull’s eye level is provided.
TYPICAL EXPERIMENTS
Determination of the reaction of a jet striking different targets mounted normal to the jet direction, at different flow rates
TECHNICAL DATA
| Target plates | Flat , 120° inward cone , 120° outward cone , 180° hemisphere | |
| Weights | 1 lot. | |
| Software for data display and analysis by computer (separately supplied). | ||
100% Original and qualityRelated products
-
Hydraulic Studies and AccessoriesFlow Meters
This equipment determines the coefficients of discharge for different flow measuring devices. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The equipment consists of a Venturi tube, an orifice plate, and a Pitot tube, made from a clear acrylic, connected in series. Pressure drop across each device is connected to a water manometer bank with a vent valve and a hand air pump.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Accuracy of different flow meters
- Losses and k value
- Calculation of the coefficient of discharge
TECHNICAL DATAVariable area flow meter 1 ea. Venturi tube 1 ea. Orifice plate 1 ea. Pitot tube 1 ea. Water manometer 1 ea. Software for data display and analysis by computer (separately supplied). (0 reviews) -
Hydraulic Studies and AccessoriesFree and Forced Vortex: Rotating Paddle
This equipment is designed to produce and measure free and forced vortices. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The equipment consists of a clear acrylic cylinder on a plinth. The free vortex is generated by water discharging
through an interchangeable orifice at the base of the cylinder and the resulting profile is measured by a combined caliper and depth scale. The forced vortex is generated by a paddle at the base of the cylinder which is rotated by jets of water, and the profile is measured by a series of depth gauges. The velocity at any point in the free and forced vortices may be measured using a pitot tube.TYPICAL EXPERIMENTS- Determination of the surface profile of a free and forced vortices Determination of velocity
- Determination of velocity
TECHNICAL DATAOrifice diameters 4 different sizes Distance from center of depth probes 0 to 110 mm. Pitot tube measuring points 3 different radius. Software for data display and analysis by computer (separately supplied). (0 reviews)