Additional information
| Brand | Essom |
|---|
Hydraulic Bench – Gravimetric
This is a service unit which provides water supply and gravimetric measurement for use in conjunction with other accessories for specific experiments (separately supplied).
The bench top is flat fiber glass with a raised edge to hold spilled water and has a quick coupling water outlet, water discharge tube as well as 4 drain holes. The experiment accessories on the bench top discharges water to the measuring tank via a tube. A measuring tank is hung on a cantilever beam on ball bearings. An adjustable tare weight and known weights are provided. When the water in the measuring tank exceeds the set weight, the beam will tilt and the measuring tank automatically discharges to the main storage tank which is drained at the bottom. A pump draws water from the storage tank and supplies to the outlet at the top. The unit is on a steel frame on wheels.
Instruction manual is also included.
TECHNICAL DATA
| Pump | 0.37 kW |
| Bench top dimensions | Approx. 126 cm long x 77 cm wide |
| Measuring weight | Over 45 kg |
| Load hanger and equivalent weights | 1 lot. |
| Main storage tank | Approx. 170 L. |
| Accessories | Stop watch and outlet hose with fittings for connection to accessory |
| Power supply | 220 V, 1 Ph, 50 Hz. Other power supply is available on request. |
100% Original and qualityRelated products
-
Hydraulic Studies and AccessoriesBends and Fittings Friction
The equipment measures pressure drops at various flow rates when water flow through different pipe bends, and fittings. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
All bends and fittings are connected in series with pressure tappings on both sides of each device. A water manometer with a vent valve and a hand air pump is connected to these tappings. A valve at the outlet is used to control outlet pressure.
TYPICAL EXPERIMENTS- Determination of Pressure Drop across various pipes and fittings at differing flow rates.
- Estimation of Loss Coefficient (K) or various pipes, pipe fittings and valve settings
TECHNICAL DATAPipe diameter (nominal) 20 mm. Enlarged pipe diameter (nominal) 35 mm. Bends 90º Miter bend , 90º small radius bend , 90º large radius bend Fittings 90º Elbow , 45º elbows , Sudden expansion , Sudden contraction Water manometer 8 tubes x 450 mm x 1 mm graduation Software for data display and analysis by computer (separately supplied). (0 reviews) -
Turbine Test SetMini Pelton Turbine Demonstration Unit, Computer Interface
This is a mini Pelton turbine for studying the turbine characteristics with data analysis by computer.
The unit consists of the mini Pelton turbine with a dynamometer, and output power sensors. The adjustable turbine nozzle directs water jet to the runner buckets.
The unit is to be used with HT110 Mini Turbine Service Unit or HB100N Hydraulic Bench (Neo) with optional accessories. Both are separately supplied.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Torque vs speed at various heads and flow rates.
- Power output vs speed for various heads and flow rates.
- Efficiency vs speed for a given head and flow rate.
- Racing characteristics.
TECHNICAL DATAConstruction - Stainless steel nozzle and hardened shaft
- Stainless steel casing with transparent window
Ratings Maximum power over 40 W Dynamometer Mechanical brake Sensors with digital display Torque and speed Software for data display and analysis by computer (separately supplied). (0 reviews)
