labts.co.id labora teknika saintifika boiler trainer
labts.co.id labora teknika saintifika boiler trainer

Training Boiler: 100kg/hr

This is a set of steam boiler and standard accessories for a study of boiler performance.

The basic unit consists of a small industrial type boiler with a burner, a feed water system, a fuel system, and instruments for monitoring boiler operation as well as instruments for control and safety. The complete unit is
arranged as a package on a pallet for easy site installation. Optional equipment are available for additional experiments.

Instruction manual is also included.

TYPICAL EXPERIMENTS
  • Pressure, temperature and flow measurements.
  • Heat of combustion, heat given to steam and boiler efficiency.
TECHNICAL DATA

The boiler set consists of:

Boiler unit:
 – Type Vertical, water tube
 – Rated output Approx. 105 kW (90,300 kcal/h)
 – Equivalent evaporation Approx. 100 kg/h steam
 – Maximum working pressure 10 kg/cm2 (0.98 MPa)
 – Measuring instruments Pressure gauge for steam outlet , Temperature sensor and indicator with a selector switch for or feed water, outlet steam and exhaust stack
 – Safety devices Safety valve , Low level alarm
 – Boiler accessories Steam pressure regulator , Steam separator , Feed water pump , Stack, 2x 2.4 m stainless steel with elbows

 

Burner:
 – Type Forced draft, pressure atomized
 – Control On-Off
 – Fuel Diesel or kerosene (LPG is available as an option.)
Fuel system Fuel tank, fuel meter and oil strainer
Feed water system Resin filter, soft water tank and water meter.
Power supply 220V, 1 Ph, 50Hz. Other power supply is available on request.
In Stock
Share (0)
Total: 0 Total: 0 Total: 0 Total: 0 Total: 0
SKU: TH101 Category: Tags: , ,
100% Original and quality

Additional information

Brand

Essom

Related products

  • Liquid Flow Process Control Trainer labts.co.id
    Process Control

    Nano Liquid Flow Process Control Trainer

    Liquid Flow control serves to demonstrate and teach the measurements and control of liquid flow processes. The Liquid Flow Process Control course provides students hands-on experience raising and lowering water flow rates to preset levels using manual control and auto-tuning methods. Students create variable demand and supply disturbances by opening an outlet valve along the supply pipe.

    Course Outline

      • Introduction to Process Control
        • Basics of Control Theory
        • Process Control Terminology
        • Controller and Tuning
        • Process Control Loop
        • Introduction to Process Measurement
      • Instrumentation and Control System
        • Process Flow Diagram
        • Piping and Instrumentation Diagram
      • Technical Documentation
        • Process Plant Drawings
          • General Arrangement Drawing
          • Full Assembly Drawing
          • 3D View Drawing
        • Instrument Details
          • Instrument Datasheet
      • Plant Operation and Process Tuning
        • Plant Optimization
          • Process Control Loop
          • Process Behavior
          • Effect of Disturbance in Process
        • Characteristic of Proportional (P), Integral (I), and Derivative (D)
        • PID Tuning using Different Methods
          • Ziegler Nichols
          • Cohen Coon
    (0 reviews)
  • Process Control Trainer labts.co.id
    Process Control

    NanoMAX Multivariable Process Control Trainer

    The NanoMAX multivariable Process Control course exposes students to the relationship between the three liquid variables to better calculate process specifications and troubleshoot potential problems. Integrated with a state-of-the-art process control training system, this unit features multiple standard control systems including panel mounted HMI/SCADA and Programmable Logic Controller (PLC). The NanoMAX also features the industry standard communication and automation protocols HART and ProfiNet.

    Course Outline

      • Fundamentals of Process Control
        • Basic of Control Theory
        • Process Control Terminology
        • Controller and Tuning
        • Process Control Loop
      • Fundamental to Process Measurement
        • Introduction to Level Measurement
        • Principle of Level Instrument
        • Introduction to Flow Measurement
        • Principle of Flow Instrument
        • Introduction to Temperature Measurement
        • Principle of Temperature Instrument
        • Introduction to Pressure Measurement
        • Principle of Pressure Instrument
      • Technical Documentation
        • Process Plant Drawings
          • Piping & Instrumentation Drawing
        • Plant Drawings
          • General Arrangement Drawing
          • Full Assembly Drawing
          • 3D View Drawing
        • Instrument Details
          • Instrument Datasheet
      • Plant Operation and Process Tuning
        • Plant Optimization
          • Process Control Loop
          • Process Behavior
          • Effect of Disturbance in Process
        • Characteristics of Proportional (P), Integral (I), and Derivative (D)
        • PID Tuning using Different Methods:
          • Ziegler Nichols
          • Cohen Coon
    (0 reviews)