Additional information
| Brand | Essom |
|---|
Compact Gear Pump Test Set – Fixed Speed
This is a self-contained bench top unit for studying the gear pump flow rate vs head at a fixed speed.
The unit consists of a storage tank and a gear pump with a motor on a steel base, and measuring instruments. It is to be used with oil or glycol.
Instruction manual is also included.
TYPICAL EXPERIMENTS
Flow rate vs head.
TECHNICAL DATA
| Pump ratings | |
| – Maximum flow rate | 20 Lpm |
| – Maximum head | 30 m water |
| – Pressure relief valve | Built-in |
| Measuring instruments: | |
| – Pressure | Pressure gauges at pump suction and discharge |
| – Flow rate | Oil meter and stop watch |
| Software for data display and analysis by computer (separately supplied). | |
| Power supplied | 220 V, 1 Ph, 50Hz. Other power supply is available on request. |
100% Original and qualityRelated products
-
Hydraulic Studies and AccessoriesHydrostatics Pressure – Tilting Submerged Quadrant
This equipment allows the moment caused by a fluid thrust on a wholly or partially submerged plane surface to be measured directly. This surface can be tilted.
A PVC quadrant is hinged on a shaft pivoted on knife edges which coincide with the quadrant center. The quadrant position is adjustable relative to a balance arm such that the submerged plane surface can be tilted by changing the lock pin position. A depth scale is indicated on the quadrant. When the quadrant is immersed in water, there are hydrostatic forces.
The balance arm has an adjustable counter balance and weights with a hanger. The quadrant is mounted on top of a clear acrylic tank which allows water to be admitted and drained to required level by a valve. The tank rests on adjustable footings and a bull’s eye level is provided.
TYPICAL EXPERIMENTS- Visual demonstration of the Shear Force and Bending Moment at a cut section in a beam
- Determination of the Centre of Pressure
TECHNICAL DATAQuadrant Inner radius 100 mm – Outer radius 1 lot. – Width 75 mm Tilting angle 0 to 30 degrees in either direction. Weights 1 lot. Software for data display and analysis by computer (separately supplied). (0 reviews) -
Turbine Test SetMini Pelton Turbine Demonstration Unit, Computer Interface
This is a mini Pelton turbine for studying the turbine characteristics with data analysis by computer.
The unit consists of the mini Pelton turbine with a dynamometer, and output power sensors. The adjustable turbine nozzle directs water jet to the runner buckets.
The unit is to be used with HT110 Mini Turbine Service Unit or HB100N Hydraulic Bench (Neo) with optional accessories. Both are separately supplied.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Torque vs speed at various heads and flow rates.
- Power output vs speed for various heads and flow rates.
- Efficiency vs speed for a given head and flow rate.
- Racing characteristics.
TECHNICAL DATAConstruction - Stainless steel nozzle and hardened shaft
- Stainless steel casing with transparent window
Ratings Maximum power over 40 W Dynamometer Mechanical brake Sensors with digital display Torque and speed Software for data display and analysis by computer (separately supplied). (0 reviews)
