Additional information
| Brand | Essom |
|---|
Mechanical Engineering Test Series
This is a bench top set for studying various principles in Mechanical Engineering. It consists of MM500-001 a basic panel for mounting accessories for specific experiment. There are over 20 sets of optional accessories for over 60 experiments. Software for data display and analysis is supplied for selected experiments. Instruction manual is also included.
TYPICAL EXPERIMENTS
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
| MM 500-111 FORCES SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
Flat plates are used for determination of center of gravity. Pulleys, cords and rings with load hangers and weights are used for force polygons. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| OPTIONAL | MM500-111-1 Work done by variable work force, vertical and tangential efforts, using rotating arm, spring balance and ruler. |
| MM 500-112 MOMENTS SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
Rigid beam is pivoted and balanced on both sides by load hangers and weights. Reaction from the load can be shown on spring balance. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-113 BENDING MOMENT | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
The beam has two parts with a ball bearing hinge at the joint. An underhung spring balance holds the hinge in compression, hence resists bending moment. The beam rests on two round supports. Load hangers and weights slide along the beam. |
| EXPERIMENT CAPABILITIES | Bending moment of a beam under loads. |
| MAIN COMPONENTS AND PARTS |
|
| MM500-114 SHEAR FORCE SET | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| EXPERIMENT CAPABILITIES | Shear force of a beam under loads. |
| MAIN COMPONENTS AND PARTS |
|
| MM500-115 SHEAR FORCE AND BENDING MOMENT SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
The beam has two parts with a ball bearing hinge at the joint. An underhung spring balance holds the hinge in compression, hence resists bending moment. The beam rests on two round supports. Load hangers and weights slide along the beam. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-117 CRANK AND TOGGLE SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
Load hanger and weight are applied on the crank to create turning moment and horizontal force is measured on the slider using load hanger and weights. |
| TECHNICAL DATA | Turning moment vs for crank resistance at different crank angles. |
| MAIN COMPONENTS AND PARTS |
|
| MM500-121 DEFLECTION OF BEAMS AND CANTILEVERS SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
A beam is placed on two supports and loads are applied on the beam by load hangers and weights. Displacement is measured by dial indicator. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-132 TENSILE TEST SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
Tensile specimen is attached to the tensile test frame where load is applied by a screw. Load is measured by a dial indicator on the spring and specimen displacement is measured by a vernier. |
| EXPERIMENT CAPABILITIES | Tensile test to failure to determine elastic limit, yield and ultimate strength of specimens. |
| MAIN COMPONENTS AND PARTS |
|
| MM500-133 TORSION SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
Circular bar is attached to two supports one fixed and the other rotating. Torsion load is applied on the rotating end via a pulley and angular displacement is measured a dial indicator on an arm. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-134 SPRING TEST SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets of various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
Coil spring(s) are attached to the test frame and load is applied to the spring(s). Spring extension is measured by a vernier. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-135 POTENTIAL AND KINETIC ENERGY SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
A pendulum, a flywheel with string, a weight hanger and weights are used to demonstrate how energy is transferred from one from to another. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-141 INCLINED PLANE SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 Mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
The set uses an adjustable slope inclined plane whose surface finish can be changed. Moving on the inclined plane is a sled, a roller or a rolling car with load. A pulley with load hangers and weights are provided for loading and friction measurement. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-142 ROTATIONAL FRICTION SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
Friction materials includes a screw jack and bushing of different materials. Pulley, load hangers and weights measure the friction. An oil cup is provided for a study of lubrication effect. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-151 PULLEY SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The set is supplied in plastics box.
The set is for demonstration of mechanical advantage for various types of pulleys using load hangers and weights. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM500-152 BELT AND CHAIN DRIVE SET | |
|---|---|
| DESCRIPTION | This is part of MM 500 mechanical Engineering Test Series which provides sets for various experiments on MM 500-001 Basic Panel (separately supplied) to study or demonstrate specific engineering principles. The kit is supplied in plastics box.
The kit includes belt and chain power transmission systems. Weights and load hangers are used for determination of mechanical advantage and efficiency. |
| EXPERIMENT CAPABILITIES |
|
| MAIN COMPONENTS AND PARTS |
|
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
| MM 500-001 BASIC PANEL | |
|---|---|
| DESCRIPTION | The panel is made from a perforated stainless steel sheet mounted on two supports with adjustable footings. The panel can be tilted, put in portrait or landscape position. Accessories for specific experiments are mounted on the panel by quick fitting screws. |
| TECHNICAL DATA |
|
100% Original and qualityRelated products
-
AutomotiveSingle Cylinder Engine Test Bed: Mechanical Brake Absorber
The unit provides basic means for testing a single cylinder gasoline or diesel engine.
The engine is connected to the mechanical brake absorber dynamometer on the test bed by a direct coupling with a safety guard. The engine throttle and dynamometer load are manually controlled. Instruments are provided for measurement of the absorber torque, speed, fuel flow rate, air flow rate, and temperatures. Fuel tank and measuring instruments are on a separate stand.
The test bed requires outside water supply for cooling.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Torque vs engine speed at various throttle setting.
- Engine brake horsepower and efficiency vs speed
- Specific fuel consumption
- Air/fuel ratio
- Volumetric efficiency
TECHNICAL DATADynamometer – Type Water cooled stainless steel mechanical brake absorber with anti splashing system. – Capacity Up to 20 kW at 5000 rpm Engine Single cylinder gasoline engine with power 3.7 kW or as required. Measuring instruments – Torque Spring balance at the dynamometer. – Speed Portable tachometer. – Fuel flow rate Graduated cylinder and stop watch. – Air flow rate Air box with pulse reducer, orifice plate, and inclined water manometer. Sensors with digital display Temperature for absorber water outlet, ambient air and exhaust gas. Software for data display and analysis by computer (separately supplied). Power supply 220 V, 1 Ph, 50 Hz. Other power supply is available on request. (0 reviews) -
Machine Elements and Theory of MachinesGyroscope, Single Motor
The apparatus is used for studying relationship between gyroscopic torque, rotor speed and rate of precession.
The equipment consists of a rotor with a motor, and a low voltage power supply and speed control. The rotor is mounted horizontally on a frame with two bearing supports. The rods with sliding weights are attached to the frame along the rotor axis to produce balance, positive or negative torque conditions. A tachometer measures rotor and progression speeds. The frame rests on a vertical shaft on bearings to permit progression. A guard with transparent front is provided for safety. The top assembly can be removed for determination experimentally the moment of inertia, and nutation study.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Gyroscope torque vs processional speed.
- Rotor speed vs gyroscope torque.
- Determination of systems moment of inertia and nutation study.
TECHNICAL DATARotor speed Up to 4000 rpm Precession speed Up to 60 rpm Portable tachometer For rotor speed. Stop watch For precession speed. Balancing weights 1 lot. Steel ruler 1 ea. Power supply 220V, 1 Ph, 50 Hz. Other power supply is available on request. (0 reviews)
