Additional information
| Brand | Intelitek |
|---|
Yaskawa Standard Pendant
| Standard Pendant | |
| Dimensions | 152 mm (w) x 299 mm (h) x 53 mm (d) |
| Pendant Display | 5.7-inch full-color touch screen, 640 x 480 (VGA) |
| Pendant Languages | English, German, Japanese, Spanish, Chinese |
| Pendant Weight | .73 kg (1.6 lbs) |
| Material | Reinforced plastics |
| Coordinate System | Joint, rectangular, cylindrical, tool, 63 user-coordinate frames |
| Windows® Menu-Driven Interface | User-selectable touch-screen menu, multiple windows supported;one SD card slot; one USB port (2.0) |
| Pendant O/S | Windows Embedded Compact 7 |
| Protection Rating | IP54 |
| Programming | |
| Programming Language | INFORM III, menu-driven programming |
| Robot Motion Control | Joint motion, linear, circular, spline interpolation |
| Multiple Device Control | Parallel Start, Twin Synchronous, Multiple Group Combinations, Station Coordinated Moves (positioners), Bases (tracks and gantries) |
| Programmable Logic Control | Ladder monitor, ladder programming, I/F pendant display, address naming, expanded logic operands |
| Maintenance | |
| Maintenance Functions | System monitor, internal maintenance clocks |
| Self-Diagnostics | >Classifies errors and major/minor alarms and displays data; monitors reducers for predictive wear; alerts when major power components reach design life |
| User Alarm Display | Displays alarm messages for peripheral devices |
| Alarm Display | Alarm messages; alarm history provides instruction of how to repair fault |
| I/O Diagnosis | Permits simulated enabled/disabled input/output |
100% Original and qualityRelated products
-
Hydraulic Studies and AccessoriesFlow Through an Orifice
This flow study equipment allows measurement of contraction and velocity coefficients, as well as discharge coefficient for an orifice discharge. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
It consists of a removable clear acrylic cylinder with adjustable constant head. Water is admitted to the cylinder via a discharge head. An adjustable overflow allows various constant heads for the test. An orifice is fitted at the bottom of the cylinder flush with the base plate. A traverse assembly is provided below the cylinder. Attached to this assembly is a wire and a pitot tube. The wire is to measure the jet diameter hence the vena contracta diameter and the pitot tube is to measure the jet velocity. The velocity head on pitot tube and total head due to tank water level are indicated on manometer tubes. The apparatus rests on adjustable footings and a bull’s eye level is provided.
TYPICAL EXPERIMENTS- Determination of contraction and velocity coefficients
- Calculation of discharge coefficient
- Study of the outlet jet (diameter, velocity)
TECHNICAL DATAStandard orifice 13 mm diameter, sharp edge Traverse travel 0.01 mm division Measuring cup 1 L Software for data display and analysis by computer (separately supplied). (0 reviews) -
Hydraulic Studies and AccessoriesFlow Over a Notch
The apparatus is for the study of flow over a notched weir. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
Three weir plates, a rectangular notch and two V notches, are provided. Characteristics of flow over the notches can be observed and coefficients of discharge can be determined. The plates are attached to the open channel of the Hydraulics Bench. Water is supplied to the channel via a discharge diffuser and passes through a stilling baffle to smooth the flow. A vernier hook and point gauge is provided to measure the height of water level in the channel.
TYPICAL EXPERIMENTS- Investigation of head against discharge
- Coefficient of discharge for notches
- Demonstration of flow over different notch weirs
TECHNICAL DATAWeir plates Rectangular notch, 60o and 90o V notches. Stainless steel vernier hook and point gauge range 0-150 mm. Software for data display and analysis by computer (separately supplied). (0 reviews)