Accessories
Showing 28–34 of 34 results
-
Mechanics of FluidsTilting Flow Channel: 150mm Wide
This is a self contained open channel designed for studying a flow phenomena. It is a service unit to be used with optional accessories and models below.
The channel is of rectangular cross section supported by rectangular steel frame. Side walls are transparent to allow full observation and are supported by adjustable steel brackets to ensure accurate wall alignment. Tilting can be adjusted by a manual screw jack. A head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank via an end tank. Models are attached to the top edges or bed of the flume by screws. Screw holes at the bed can also be used for pressure tapping to measure pressure loss along the channel length.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Open channel flow.
- Flow measurement.
- Hydraulic jump.
- Continuity and energy equations.
- Discharge under sluice gate.
TECHNICAL DATAChannel size 150 mm wide, 350 mm high and 6 m long or as required Tilting adjustment -1% to + 3% Side walls Clear acrylic tempered glass with clear vertical scale Channel bed Stainless Steel Head tank Stainless Steel End tank Stainless Steel Sluice gate Stainless steel, rack and pinion type, built in at downstream end of the channel Flow measurement Water meter and stop watch Software for data display and analysis by computer (separately supplied). Power supply 220V 1Ph 50 Hz. Other power supply is available on request. (0 reviews) -
Mechanics of FluidsTilting Flow Channel: 150mm Wide (Adjustable Bed)
This is a self contained open channel designed for studying flow phenomena with change in bed slope. It is a service unit to be used with optional accessories and models below.
The channel is of rectangular cross section supported by rectangular steel frame. Side walls are transparent to allow full observation and are supported by adjustable steel brackets to ensure accurate wall alignment. Tilting can be adjusted by a manual screw jack. The middle section of the bed can be adjusted manually upward or downward by a screw. A head tank with a stilling baffle provides a smooth flow and water is returned to the storage tank via an end tank. Models are attached to the top edges or bed of the flume by screws. Screw holes at the bed can also be used for pressure tapping to measure pressure loss along the channel length.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Open channel flow.
- Flow measurement.
- Hydraulic jump.
- Continuity and energy equations.
- Discharge under sluice gate.
TECHNICAL DATAChannel size 150 mm wide, 350 mm high and 6 m long or as required Tilting adjustment -1% to + 3% Side walls Clear acrylic tempered glass with clear vertical scale Channel bed Stainless Steel Bed adjustment Upward and downward. Storage tank Approx. 500 L Head tank Stainless Steel End tank Stainless Steel Sluice gate Stainless steel, rack and pinion type, built in at downstream end of the channel Flow measurement Water meter and stop watch Software for data display and analysis by computer (separately supplied). Power supply 220V 1Ph 50 Hz. Other power supply is available on request. (0 reviews) -
Mechanics of FluidsTilting Flow Channel: 300mm Wide
The channel is designed for studying the hydraulic flow phenomena. It is a service unit to be used with optional accessories and models below. Instruction manual is also included.
Under Frame
The channel bed is an invert which rests on an H-beam under frame. The invert has screws at interval for vertical and side adjustment of the invert to ensure that the channel bed is strictly straight and level though out the full length. The initial length of the beam is 6 m. An additional section may be added for longer total length. Each section is shipped with glass side walls. This simplifies site installation as there is only one joint and is easier to ensure alignment of the channel. The H-beam is supported by a fulcrum at one end and an adjustable height support at the other end.Slope Adjustment
The adjustable height support uses twin screws. Each screw is driven by a worm and wheel gear box with a common motor. A slope scale is provided at one end of the flume.Channel Bed
The channel bed is made of stainless steel with screw holes of equal distance along the channel length to hold accessories or models to the channel bed. These holes can also be used for pressure tapping to measure pressure loss along the channel length.Side Walls
For safety reasons, the side walls are made of tempered glass or clear acrylic. The walls are supported at interval by brackets with screw adjustment to ensure that the channel wall is straight and vertical.Instrument Carriage
Top rails made of stainless steel tubes are attached to the top angle on each wall of the channel. Screws supporting the rails can be adjusted to ensure uniform height and in a straight line. A scale graduated in mm. is attached along the full length of one top angle of the walls. The instrument carriage is manually operated.Instrument Carriage
Top rails made of stainless steel tubes are attached to the top angle on each wall of the channel. Screws supporting the rails can be adjusted to ensure uniform height and in a straight line. A scale graduated in mm. is attached along the full length of one top angle of the walls. The instrument carriage is manually operated.Head Tank
The head tank is made of stainless steel and bottom slope to ensure smooth flow into the channel. Perforated sheets are also provided in the head tank to further smoothen the flow.Storage Tank
The storage tank has adequate water to fill the full channel. Fiber glass storage tank(s) is provided at downstream end of the channel. Capacity of tank varies according to channel tank.Model Installation
A mobile ladder is used. In the case of small fiber glass tanks are used, the top covers of the tanks are used as a walkway and model installation.Circulating Pump
The pump seal is mechanical. A geared butterfly valves is provided for accurate flow control.Flow measurement
A flow digital display is used for easy observation on flow adjustment. A water meter is available as an option and may be used as a reference for flow indicator setting later.Model and Accessories
All accessories and models have side seals to ensure no water seepage or leakage through the sides of the models. A wide variety of models and accessories are available as an option.TYPICAL EXPERIMENTS- Flow measurement.
- Hydraulic jump.
- Analysis of model structures.
- Gauging structures.
- Velocity profile.
- Continuity and energy equations.
- Similarity laws.
- Roughened bed characteristics.
- Surge propagation.
- Wave generation and absorption.
TECHNICAL DATAFlume dimensions 300 mm wide, 450 mm high Flume length 6, 8, 10, 12 and 12.5 m (optional) Tilting adjustment -1% to +3% Side walls Tempered glass Channel bed Stainless steel Sluice gates Stainless steel, rack and pinion type, built-in at downstream end of flume Flow measurement Flow digital display Software for data display and analysis by computer (separately supplied). Power supply 380 V, 3 Ph, 50 Hz. Other power supply is available on request. (0 reviews) -
AccessoriesWave Probe Mounting Bracket
This wave probe mounting bracket will fit 600 mm to 1200 mm wave probes.
(0 reviews) -
AccessoriesYaskawa Smart Pendant
Radically Change the Way a Robot is Programmed
Ideal for all robot users, novice and experience, the easy-to-use touchscreen Smart Pendant simplifies INFORM programming for easy-to-understand operation and fast implementation of the robot system. The Smart Pendant’s intuitive Human Machine Interface (HMI) adapts to the programmer’s style, and the built-in Smart Frame feature allows the robot to adapt to the operator’s position, eliminating the utilization of coordinate frames and allowing for easy robot jogging. Smart Pendant is included with all Smart Series robots.
- Fast, simple learning curve
- Easy troubleshooting and error recovery
- Easy-to-understand operation; intuitive format
- Simplified INFORM programming supports powerful controller functionality
Smart Pendant Specifications Dimensions 215 (W) x 283 (H) x 68.5 (D) mm
8.5” (W) x 11.1” (H) x 2.7” (D)Pendant Display 10.1” WXGA TFT Display
1280 x 800 pixels
LED back light touch panelPendant Weight 1.12 kg / 2.5 lbs (0 reviews) -
AccessoriesYaskawa Standard Pendant
Standard Pendant Dimensions 152 mm (w) x 299 mm (h) x 53 mm (d) Pendant Display 5.7-inch full-color touch screen, 640 x 480 (VGA) Pendant Languages English, German, Japanese, Spanish, Chinese Pendant Weight .73 kg (1.6 lbs) Material Reinforced plastics Coordinate System Joint, rectangular, cylindrical, tool, 63 user-coordinate frames Windows® Menu-Driven Interface User-selectable touch-screen menu, multiple windows supported;one SD card slot; one USB port (2.0) Pendant O/S Windows Embedded Compact 7 Protection Rating IP54 Programming Programming Language INFORM III, menu-driven programming Robot Motion Control Joint motion, linear, circular, spline interpolation Multiple Device Control Parallel Start, Twin Synchronous, Multiple Group Combinations, Station Coordinated Moves (positioners), Bases (tracks and gantries) Programmable Logic Control Ladder monitor, ladder programming, I/F pendant display, address naming, expanded logic operands Maintenance Maintenance Functions System monitor, internal maintenance clocks Self-Diagnostics >Classifies errors and major/minor alarms and displays data; monitors reducers for predictive wear; alerts when major power components reach design life User Alarm Display Displays alarm messages for peripheral devices Alarm Display Alarm messages; alarm history provides instruction of how to repair fault I/O Diagnosis Permits simulated enabled/disabled input/output (0 reviews) -
AccessoriesYRC-1000 Micro Controller
Ultra-Compact, Industrial Robot Controller
The ultra-compact YRC1000micro controller is a powerful and precise robotic arm controller that minimizes installation space and optimizes performance. Its small footprint and lightweight cabinet are ideal for factories with high-density layouts, where stacking of controllers may be required.
For education, the YRC-1000micro is a good fit as it provides all the functionality and flexibility required to train students to operate and program robots.
YRC-1000micro Features
- Powerful and precise, ultra-compact robot controller minimizes installation space and optimizes performance.
- Small footprint and lightweight cabinet is ideal for factories with high-density layouts, where stacking of controllers may be required.
- Controller can be installed in either a vertical or horizontal position, as well as within a 19-inch rack, accommodating a wide range of layouts.
- Optimized acceleration / deceleration control can improve the robot’s cycle time up to 10%.
- High path accuracy control enables increased precision in trajectory performance independent of motion speed.
- Robust motion software allows for highly accurate path planning, often resulting in reduced cycle times.
- Single controller-to-robot cable for improved cable reliability.
- Onboard interactive preventive maintenance data allows for simplified maintenance scheduling and robot performance analysis.
(0 reviews)
