Additional information
| Brand | Essom |
|---|
Flow Over a Notch
The apparatus is for the study of flow over a notched weir. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
Three weir plates, a rectangular notch and two V notches, are provided. Characteristics of flow over the notches can be observed and coefficients of discharge can be determined. The plates are attached to the open channel of the Hydraulics Bench. Water is supplied to the channel via a discharge diffuser and passes through a stilling baffle to smooth the flow. A vernier hook and point gauge is provided to measure the height of water level in the channel.
TYPICAL EXPERIMENTS
- Investigation of head against discharge
- Coefficient of discharge for notches
- Demonstration of flow over different notch weirs
TECHNICAL DATA
| Weir plates | Rectangular notch, 60o and 90o V notches. | |
| Stainless steel vernier hook and point gauge | range 0-150 mm. | |
| Software for data display and analysis by computer (separately supplied). | ||
100% Original and qualityRelated products
-
AccessoriesFS100 Controller
The FS100 is a compact controller with performance and functions optimized for materials handling and assembly. It can be used with robots with a 20-kg payload or less.
Fits in a 19-inch rack and can be installed under conveyors. The controller has the performance required for high speed, discrete operations.The FS100 supports a wide range of communication networks and a single controller supports up to eight axes.
FS-100 Features
- Powerful controller for high-performance applications
- Open software architecture and open communications
- Small footprint saves space
- Energy savings
- Compliant to safety standards
(0 reviews) -
Hydraulic Studies and AccessoriesFlow Meters
This equipment determines the coefficients of discharge for different flow measuring devices. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The equipment consists of a Venturi tube, an orifice plate, and a Pitot tube, made from a clear acrylic, connected in series. Pressure drop across each device is connected to a water manometer bank with a vent valve and a hand air pump.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Accuracy of different flow meters
- Losses and k value
- Calculation of the coefficient of discharge
TECHNICAL DATAVariable area flow meter 1 ea. Venturi tube 1 ea. Orifice plate 1 ea. Pitot tube 1 ea. Water manometer 1 ea. Software for data display and analysis by computer (separately supplied). (0 reviews)