Additional information
| Brand | Intelitek |
|---|
FS100 Controller
The FS100 is a compact controller with performance and functions optimized for materials handling and assembly. It can be used with robots with a 20-kg payload or less.
Fits in a 19-inch rack and can be installed under conveyors. The controller has the performance required for high speed, discrete operations.
The FS100 supports a wide range of communication networks and a single controller supports up to eight axes.
FS-100 Features
- Powerful controller for high-performance applications
- Open software architecture and open communications
- Small footprint saves space
- Energy savings
- Compliant to safety standards
100% Original and qualityRelated products
-
Hydraulic Studies and AccessoriesMini Axial Flow Propeller Turbine
This equipment demonstrates axial flow propeller turbine characteristics i.e. torque, power and efficiency at different speeds for various heads and flow rates of water. It is to be used with a submersible pump and an Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The turbine fixed guide vanes direct water helically to the runner. Inlet-pressure is indicated by a manometer. Torque is measured by a Prony brake with two spring balances. Speed is indicated on a portable tachometer. Flow rate is measured by the Hydraulics Bench measuring tank.
TYPICAL EXPERIMENTS- Efficiency of Axial flow propeller turbine
- Characteristic of Axial flow propeller turbine
- Turbine torque and power output versus speed and flow rate at various heads.
TECHNICAL DATAConstruction Stainless steel casing with transparent . guide vane and runner section Maximum power 10 W Submersible pump 0.37 kW Measuring instruments – Torque Spring balances – Speed Portable tachometer Software for data display and analysis by computer (separately supplied). (0 reviews) -
Hydraulic Studies and AccessoriesSeries and Parallel Pumps, Fixed Speed
This equipment is designed to study head vs flow rate characteristics of two pumps connected in series or parallel. It is to be used with HB100 Hydraulics Bench (separately supplied)
A fixed speed pump is mounted on the Hydraulics Bench which acts as a service module. The Hydraulics Bench pump is used as a second pump. The two pumps are interconnected and by manipulating flow control valves, the pumps can be operated individually or both pumps in series or in parallel. Pressure gauges are installed at the pump suction and discharge. The pump draws water from the Hydraulics Bench storage tank via a suction hose with a strainer and delivers flow to the Hydraulics Bench measuring tank.
TECHNICAL DATAPump ratings : Maximum flow rate 80 lpm and maximum head 18 m. water. Pressure gauges : Suction and discharge. Power supply : 220 V, 1 Ph, 50 Hz. Net (unpacked) shipping dimensions WxLxH : 36 x 90 x 50 cm Net weight : Approx. 18 kg (0 reviews)