Additional information
| Brand | Essom |
|---|
Flow Over A Notch Channel
This is an open channel with flat top edge for Flow Over A Notch experiment on HB100G Hydraulics Bench gravimetric or HB 101 Basic Hydraulics Bench.
The unit is to be placed on top of HB 100G or HB 101. Water is admitted to the channel via a discharge diffuser and passes through a perforated sheet. Water is discharged over a detachable weir plate to the end section before draining to the storage tank. A hook and point gauge are placed on the channel top edge for water level measurement. The channel has adjustable footings.
Instruction manual is also included.
TECHNICAL DATA
| Flow section | 25 cm wide x 17 cm deep | |
| Weir plates | Rectangular notch, 60o and 90o V notches | |
| Software for data display and analysis by computer (separately supplied). | ||
| Stainless steel vernier hook and point gauge: range 0-150 mm. | ||
100% Original and qualityRelated products
-
Hydraulic Studies and AccessoriesPipe Friction
This equipment measures pressure drop when water flows through a vertical pipe at various flow rates both laminar and turbulent. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
It consists of adjustable constant head water source of removable clear acrylic cylinder for laminar flow. Turbulent flow may be achieved by directly connecting the pipe to the Hydraulics Bench water supply. A water manometer with a vent valve, a hand air pump and a differential pressure gauge are provided for measurement of pressure drop. A valve at the outlet is used to control outlet pressure.
TYPICAL EXPERIMENTS- Investigations of laminar and turbulent flows
- Demonstration and measurement in a change of the laws of resistance (friction factor) from laminar to turbulent flow
TECHNICAL DATAWater manometer 450 mm x 1 mm graduation. Differential pressure gauge 1 ea. Test section length Over 500 mm. Measuring cup 1 L. Software for data display and analysis by computer (separately supplied) (0 reviews) -
Hydraulic Studies and AccessoriesPitot Tube Apparatus
This apparatus is for a study of velocity distribution across pipe section for a water flow in pipe, and for measurement of flow velocity. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The apparatus consists of a total head tube and a static head tube for the Pitot, clear acrylic pipe, inlet and outlet, and an inclined manometer. The total head tube can be moved up or down vertically with a scale for indication of the tube position. Differential pressure is measured by a multiple inclination manometer.
TYPICAL EXPERIMENTS- Accuracy of pitot tube meters
- Losses and k value
- Calculation of the coefficient of discharge
TECHNICAL DATAAcrylic tube 34 mm. diameter. Total head probe 1 ea. Inclined water manometer 0-450 x 1 mm graduation. Software for data display and analysis by computer (separately supplied). (0 reviews)