Additional information
| Brand | Essom |
|---|
Piping Loss Test Set – Small
This is a self-contained unit for studying the friction loss in pipes, pipe fittings and valves at various flow rates.
The unit consists of a pump, a storage tank and a water proof panel on which all friction loss components are arranged.
The loss is measured by differential pressure using manometer and differential pressure gauge. Pressure tapping is by small ball valves with quick connection. All pressure taps are connected by flexible hoses to a set of specially arranged manifolds such that differential pressure across any component can be measured simply by opening valves without removing the hoses. The unit is on a steel frame on wheels.
Instruction manual is also included.
TYPICAL EXPERIMENTS
- Friction losses in straight pipes at various flow rates.
- Friction losses in pipe fittings, valves, sudden expansion and contraction at various flow rates.
TECHNICAL DATA
| Friction loss components | ||
| – Linear pipes, PVC | 3 different diameters. | |
| – Short radius bends | 2 ea. | |
| – Regular elbow | 1 ea. | |
| – 45o elbows | 2 ea. | |
| – Valves | Gate, globe, ball, and check | |
| – Other components | Tee section, | |
| Sudden expansion | ||
| Sudden contraction | ||
| Measuring Instruments | ||
| – Water meter and stop watch | ||
| – Water manometer with hand air pump | ||
| – Differential pressure gauge | ||
| Software for data display and analysis by computer (separately supplied). | ||
| Power supply | 220 V, 1 Ph, 50 Hz. Other power supply is available on request. | |
Related products
-
Hydraulic Studies and AccessoriesHydraulics Bench – Neo
Hydraulic Bench-Neo is a service basic unit for providing water supply and flow rate measurement to the other hydraulic bench accessories (separately supply) for specific experiments.
The bench top is flat fiber glass with edge and open channel. The accessory for the experiment is placed across the channel and discharges water via a drain pipe to the storage tank which has a drain valve. A pump draws water from the storage tank and supplies to the quick coupling outlet at the top. A lid for the drain pipe is provided to trap water in the channel for some experiment. The unit is on a steel frame on wheels.
Instruction manual is also included.
TECHNICAL DATAPump 0.37 kW. Bench top dimensions Approx. 126 cm long × 78 cm wide Open channel Approx. 25 cm wide × 17 cm deep Storage tank Approx. 180 L. Half union at outlet pipe for connection to external pump. Flow measurement Flow digital display Accessory Outlet hose with fittings for connection to accessory Power supply 220 V, 1 Ph, 50 Hz. Other power supply is available on request. (0 reviews) -
Hydraulic Studies and AccessoriesMetacentric Height
This equipment is designed to determine the metacentric height of a floating body and the height variation with the tilt angle. It is to be used with Hydraulics Bench i.e. HB100 or HB100N or a bowl (separately supplied).
The equipment consists of a rectangular pontoon. The center of gravity of the pontoon can be moved sideways by moving horizontal jockey weight.
The angle of tilt of the pontoon is indicated by a plumb-bob on a scale attached. The center of gravity of the pontoon can also be moved vertically by means of adjustable vertical weights on the mast.
TYPICAL EXPERIMENTS- Experiment to illustrate the floatation characteristics
- Determination of the Metacentric Height
TECHNICAL DATAPontoon 400 mm long x 200 mm wide x 100 mm high. Horizontal scale 1 mm graduation. Maximum angle of tilt ± 13ox 0.5º graduation Vertical sliding weight 1 ea. Jockey weight 1 ea. Software for data display and analysis by computer (separately supplied). (0 reviews)