Accessories
Showing 10–18 of 34 results
-
Hydraulic Studies and AccessoriesFlow Through an Orifice
This flow study equipment allows measurement of contraction and velocity coefficients, as well as discharge coefficient for an orifice discharge. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
It consists of a removable clear acrylic cylinder with adjustable constant head. Water is admitted to the cylinder via a discharge head. An adjustable overflow allows various constant heads for the test. An orifice is fitted at the bottom of the cylinder flush with the base plate. A traverse assembly is provided below the cylinder. Attached to this assembly is a wire and a pitot tube. The wire is to measure the jet diameter hence the vena contracta diameter and the pitot tube is to measure the jet velocity. The velocity head on pitot tube and total head due to tank water level are indicated on manometer tubes. The apparatus rests on adjustable footings and a bull’s eye level is provided.
TYPICAL EXPERIMENTS- Determination of contraction and velocity coefficients
- Calculation of discharge coefficient
- Study of the outlet jet (diameter, velocity)
TECHNICAL DATAStandard orifice 13 mm diameter, sharp edge Traverse travel 0.01 mm division Measuring cup 1 L Software for data display and analysis by computer (separately supplied). (0 reviews) -
Hydraulic Studies and AccessoriesFree and Forced Vortex: Rotating Paddle
This equipment is designed to produce and measure free and forced vortices. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The equipment consists of a clear acrylic cylinder on a plinth. The free vortex is generated by water discharging
through an interchangeable orifice at the base of the cylinder and the resulting profile is measured by a combined caliper and depth scale. The forced vortex is generated by a paddle at the base of the cylinder which is rotated by jets of water, and the profile is measured by a series of depth gauges. The velocity at any point in the free and forced vortices may be measured using a pitot tube.TYPICAL EXPERIMENTS- Determination of the surface profile of a free and forced vortices Determination of velocity
- Determination of velocity
TECHNICAL DATAOrifice diameters 4 different sizes Distance from center of depth probes 0 to 110 mm. Pitot tube measuring points 3 different radius. Software for data display and analysis by computer (separately supplied). (0 reviews) -
Hydraulic Studies and AccessoriesFree and Forced Vortex: Rotating Tank
This equipment is designed to produce and measure free and forced vortices. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The equipment consists of a clear acrylic cylindrical tank inside which is another smaller perforated clear acrylic cylinder. The tank is rotated by a small motor. A small hole is provided at the center of the bottom of the tank. A forced vortex is formed when a fixed amount of water is contained in the rotating vessel. A free vortex is formed when water is admitted at the annulus and drain through the bottom hole. A cross bar with scale and a sliding probe holder are provided above the vessel. Water surface profile is measured by a depth probe attached to the cross bar. A transparent tube with built-in pitot probe to measure total head is also attached to the cross bar.
TYPICAL EXPERIMENTS- Determination of the surface profile of a free and forced vortices
- Determination of velocity
TECHNICAL DATAOrifice diameters 3 different sizes. Depth probe 1 ea. Pitot tube 1 ea. Portable tachometer 1 lot. Power supply 220 V, 1 Ph, 50 Hz or as required Software for data display and analysis by computer (separately supplied). (0 reviews) -
AccessoriesFS100 Controller
The FS100 is a compact controller with performance and functions optimized for materials handling and assembly. It can be used with robots with a 20-kg payload or less.
Fits in a 19-inch rack and can be installed under conveyors. The controller has the performance required for high speed, discrete operations.The FS100 supports a wide range of communication networks and a single controller supports up to eight axes.
FS-100 Features
- Powerful controller for high-performance applications
- Open software architecture and open communications
- Small footprint saves space
- Energy savings
- Compliant to safety standards
(0 reviews) -
Hydraulic Studies and AccessoriesFulid Statics and Manometry
This is a bench top apparatus for studying and measurement of liquid under hydrostatic conditions using manometers.
The apparatus consists of a transparent tank connected to various types of manometers and other measuring devices for measurement of level, pressure and differential pressure.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Head of liquid in manometer.
- Measurement of liquid level using scale with parallax principles.
- Liquid surface in tubes of different diameters.
- Measurement of change in liquid level using Vernier hook and point gauge.
- Measurement small change of liquid level using micromanometer.
- Measurement of differential pressure by single manometer.
- Measurement of small differential pressure using inclined manometer.
- Measurement of liquid differential pressure using inverted U-tube.
- Measurement of gas differential pressure using U-tube.
- Sensitivity of U-tube manometer due to liquid density.
- Pressure drop of fluid flow in pipe.
- Effect on trapped air on manometer accuracy.
TECHNICAL DATAMain reservoir tube 100 mm inside diameter Manometer measuring range 0-450 mm. Manometer tubes 8 mm inside diameter – 1 U-tube
– 1 inverted U-tube
– 2 vertical tubes
– 1 vertical tubes with different cross section
– 1 twin tube inclined manometerAccessories
– 1 tube lid
– 1 gas bubble micro-manometer
– 1 syringe
– 1 hook and point gauge(0 reviews) -
Hydraulic Studies and AccessoriesImpact of a Jet
This equipment provides measurement of force developed by a water jet on different stationary targets. It is to be used with Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The equipment consists of a removable clear acrylic cylinder. Water is supplied through a tube at the bottom of the cylinder and discharged vertically through a nozzle onto a target plate. Each plate maintains the same working distance from the nozzle. A clear acrylic guard is provided to prevent water jet from splashing on the target. Force on the plate pushes its stem upward. Dead weight is then applied on the stem to counter balance the force exerted by the water jet. This balance is indicated by a pointer on a steel rod next to the weight. The apparatus rests on adjustable footings and a bull’s eye level is provided.
TYPICAL EXPERIMENTSDetermination of the reaction of a jet striking different targets mounted normal to the jet direction, at different flow rates
TECHNICAL DATATarget plates Flat , 120° inward cone , 120° outward cone , 180° hemisphere Weights 1 lot. Software for data display and analysis by computer (separately supplied). (0 reviews) -
Hydraulic Studies and AccessoriesMini Axial Flow Impulse Turbine
The turbine twin nozzles with flow control valves direct water jets to the runner radial blades. Nozzle pressure is indicated by a pressure gauge. Torque is measured by a Prony brake with two spring balances. Speed is indicated on a portable tachometer. Flow rate is measured by the Hydraulics Bench measuring tank.
TYPICAL EXPERIMENTS- Efficiency of Axial flow impulse turbine
- Characteristic of Axial flow impulse turbine
- Turbine torque and power output versus speed and flow rate at various heads.
TECHNICAL DATAConstruction Stainless steel casing with transparent discharge window Maximum power 25 W Measuring instruments – Torque Spring balances – Speed Portable tachometer Software for data display and analysis by computer (separately supplied). (0 reviews) -
Hydraulic Studies and AccessoriesMini Axial Flow Propeller Turbine
This equipment demonstrates axial flow propeller turbine characteristics i.e. torque, power and efficiency at different speeds for various heads and flow rates of water. It is to be used with a submersible pump and an Hydraulics Bench i.e. HB100 or HB100N (separately supplied).
The turbine fixed guide vanes direct water helically to the runner. Inlet-pressure is indicated by a manometer. Torque is measured by a Prony brake with two spring balances. Speed is indicated on a portable tachometer. Flow rate is measured by the Hydraulics Bench measuring tank.
TYPICAL EXPERIMENTS- Efficiency of Axial flow propeller turbine
- Characteristic of Axial flow propeller turbine
- Turbine torque and power output versus speed and flow rate at various heads.
TECHNICAL DATAConstruction Stainless steel casing with transparent . guide vane and runner section Maximum power 10 W Submersible pump 0.37 kW Measuring instruments – Torque Spring balances – Speed Portable tachometer Software for data display and analysis by computer (separately supplied). (0 reviews) -
Flow Measurement and Flow StudyOpen Channel and Closed Channel Flow
This is a floor standing open channel which can be quickly converted into a closed channel for studying both open and closed channel flow. It is to be used with HB100 Hydraulics Bench (separately supplied)
The channel has transparent side walls with tanks at both ends for supplying water to and receiving water from the channel. Each tank has a flow control valve to control flow and water level in the channel. The inlet tank has a stilling arrangement. A removable lid is placed on top of the open channel to convert it to a closed channel. The mid section of the channel bed is adjustable for demonstration of Bernoulli theorem in closed conduit flow.
Accessories and measuring instruments are provided for the flow study.
Instruction manual is also included.
TYPICAL EXPERIMENTSOpen Channel Flow – Flow over sharp crested, broad crested and ogee weirs. – Flow under sluice gate. – Subcritical, critical and super critical flow. – Energy dissipation. – Hydraulic jump. Closed Channel Flow. – Bernoulli and continuity equations. – Measurement of static pressure and total pressure. – Calculation of flow velocity. TECHNICAL DATATest section width x depth x length 7.5 x 15 x 120 cm. Bed adjustment Up to 75 mm upward Measuring instruments – Manometer 1 set. – Pitot tubes 3 ea. Accessories – Sluice gates 2 ea. – Weirs 3 ea. – Bridge pier 1 ea. – Removable lid for closed channel conversion 1 ea. – Connecting hose 1 ea. Software for data display and analysis by computer (separately supplied). (0 reviews)