Additional information
| Brand | Essom |
|---|
Unsymmetrical Cantilever
The apparatus is used for studying a cantilever deflection and determining shear center when the plane of loading does not co-inside with the axis of symmetry of the cross section. It is to be used with ST305 Universal Base Frame or ST300 Universal Structural Frame (separately supplied).
The cantilever under test is mounted horizontally on a support column at one end. The mounted end can be rotated to indicate its position relative to a fixed angular scale. Load is applied through a weight hanger and weights at the free end. A circular disc is attached to the free end and vertical and horizontal displacements may be measured by two dial indicators. The pin where weight hanger is hung can be moved laterally on the circular disc across and outside the section of the cantilever to determine shear center.
Instruction manual is also included.
TYPICAL EXPERIMENTS
- Vertical and horizontal displacements vs angular positions for an applied load.
- Relationship between the vertical and horizontal deflections and the principal
- Determination of area moment of inertia around neutral axis.
TECHNICAL DATA
| Cantilever section made from extruded aluminum 500 mm long. | |
| – Angle section | 1 |
| – Channel section | 1 |
| – Rectangular section | 1 |
| Load hanger | 1 |
| Weights | 1 lot |
| ST131 Dial Indicators | 2 |
| Software for data display and analysis by computer (separately supplied). | |
100% Original and qualityRelated products
-
Structures and AccessoriesInfluence Line Apparatus
The equipment is used for studying the reactions under various conditions of load at all supports along a three-span bridge. It is to be used with ST300 Universal Structural Frame (separately supplied).
The bridge has a cantilever end sections and a suspended center section. The location of the supports is adjustable.
The supports are vertical force supports for measurement of loads. The deflection of the bridge can be measured by dial indicators.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Influence lines for supports and internal reactions due to a load moving across the beam structure.
- The effect of loads to bridge support reactions and internal reactions between the cantilever and suspended sections.
TECHNICAL DATABridge: - End span length : 2 ea. 250 mm
- Center span length : 150 mm
ST 124 Vertical Force Supports 4 Rolling loads 2 ST131 Dial Indicators 2 Software for data display and analysis by computer (separately supplied). (0 reviews) -
Structures and AccessoriesArea Moment Method
The equipment is used for verification of the deflections and slopes of a beam by area-moment method. It is to be used with ST300 Universal Structural Frame (separately supplied).
The beam has a moment support and one built-in / knife edge support. The supports allow longitudinal travel of the beam. The moment support has a rotating arm which is monitored by a dial indicator. The moment is applied and measured by load on the rotating arm. The beam deflection is measured by a dial indicator.
Instruction manual is also included.
TYPICAL EXPERIMENTS- Deflections and slopes of a beam by area-moment method
- Shape of a deflected beam.
TECHNICAL DATATest beam – Steel 2 – Aluminum 1 – Brass 1 ST 115 Moment Support 1 ST 112 Built-in/Knife edge Support 1 Pulley set 1 Hanger slider 1 Cord 1 Load hangers 2 Weights 1 lot. ST131 Dial Indicator 3 Software for data display and analysis by computer (separately supplied). (0 reviews)
